I found a few of these driven clutches in a box of minibike parts. No markings on them. 6" diameter asymmetrical for a 5/8" jackshaft. Someone said a Minibike manufacturer may have made them? Any info is appreciated.
I would like to use one on my terra floater and looking for the correct...
I found a few of these driven clutches in a box of minibike parts. No markings on them and they appear to be new but look like they have been on a shelf for some time. 6" diameter asymmetrical for a 5/8" jackshaft. Asking $43 shipped...paypal only. Any info on these it is appreciated.
Would...
65$ delivered to you lower 48 address.
Will take a couple days to get it out with the holidays and I need to find a box.
5/8" hole
No shaft, in picture months ago but now gone.
I have a new Comet 30 series 3/4 bore driven half of torque converter that is 6 inch in diameter. The Price is $50.00 + Shipping
I will add a special bonus part a Aluminum pilot washer that I had made for me by. Mark Capps our own friend who past away Yellowhand
I take pay-pal and USPS...
This stuff is leftover from my days as "King of the MTD Wheelie" ..:cool:
There are a pair of NOS V-Plex 6" Drivens.... 5/8" bore. They have different springs and different engagement speeds so you can fool around with the one you want.
Complete with NOS shaft (9") that has machined...
Up for sale is a TAV Driven Clutch for $25 shipped. The Green Spring somehow got messed up. So selling as for parts or repair. I just replaced it with a a Chinese driven because I didn't have time to mess with it and knowing me I probably wouldn't put a new spring on correctly. Other than...
I got this dingo and i'm try to find the cam buttons and a spring for the driven clutch it is a asymetrical set up i believe 30 series. Searched some of the parts sites and i cant seam to find cam buttons that look the same and im wondering if a green 30 series spring will work in place of the...
I'm trying to get the driven pulley off of my '70 Rupp, and I'm stumped.
Here's what it looked like before removing the nut:
I have no clue what that square piece of metal is under the nut... it was bent up on one end (over the nut), so I suspect it was some kind of hacked version of a...
Does anyone here have any info on repair/servicing the secondary driven clutches used on the large RTS trikes? I had mine apart and want to make sure it is correct.
Looking for a deal on a used 30 series drive and driven unit. My son is fixing up a go kart roller we picked up. The dopey kids who owned it had dissasembled it and left it all in the yard for who knows how long. Torque converter parts were nowhere to be found. I have few things to trade if...
I have a Comet 30 driver and driven (7") that are both 3/4" bore. They won't work on my packmule with the engine I have. [Too much distance, can't find a long enough belt]. When I got these I cleaned them up and lubed the driver as prescribed with a dry lube.
I will sell these for $125 (shipped)...
Hi - new to the forum - recently obtained a pair of Trail Sport minis w/3.5 hp Tecumseh engines that had been stored for a number of years, and fixing one up for my son for Christmas - the torque converter has some play in the rear pulley, the bearings etc. all seem good but it is loose where it...
Well I have one new Comet 30 series asymmetrical driven half 6 inch in diameter with a 3/4 inch bore. Price is $60.00 firm
I use Pay pal and money orders for payment, and ship using USPS
Steve :scooter:
[RIGHT]
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.