Howdee!
Here is a nice Powell driven unit. I believe it is from a model D, but not 100% sure of that. There are some small dents that should be an easy fix. The pic facing the pulley is where is the dent is. It probably could use new bearings. The sprocket has wear, but is definitely useable...
Looking for NOS Comet Series 30 1" bore driver for engine PTO shaft that uses the asymmetric drive belt and the matching Comet Series 30 3/4" bore 6" driven variable pitch pulley unit.
Must be made 10+ years ago by the original Comet Industries.
I realize the newly taken over Comet...
Is there any trick to this? Ive loosened both lock nuts on each side of the driven. I've sprayed WD40 and let sit over night, heated with a torch and haven't moved it a bit.:hammer:
The rusty hulk that I'm starting with is so bad that I cannot tell what part is what. The driven side bearings had come out of the housing and the entire area was rusted out. So today I received some parts and I was hoping to find out if I had this assembled correctly. I'm especially...
Selling an Original Comet Driven unit. This piece came off my 1972-1974 MTD MudBug.
It is an Symmetrical Inboard 7" diameter and 5/8" bore with key-way.
I am asking $35 dollars + shipping ... from 26041
I have a heathkit hilltopper and the driven part of the torque converter is in bad shape. Can I replace the driven section of a cat99 in this bike with a 30 driven unit?
I see that they are both asymmetrical. Sorry for the questions but I am new to this. I want to still use the stock covers
Hey guys, I would prefer to assemble this bike with an original 2 speed clutch if possible. Please see the photo that another member on here took of his assembly. I would like it in good to very good condition with little to no chain wear on the sprocket teeth. Let me know if you have one...
I have this old comet 20 series driven unit that is 40 years old and I can not get the cam off.....
I removed the 3 allen screws ( which should be like a retaining clip on new drivens ).
Not sure if it is stuck from 40 years of corrosion or it was never meant to come off.
What do you guys...
Any help with gear/driven replacement for Powell mini bike?
Got this on Saturday.
Rode it around for about 2 hours over the weekend. Realized the noise I thought was the slop in the belt was actually the chain binding. Took chain off and discovered it has trashed the gear on back of the...
Selling this because i went with a bigger engine on my project.This is in excellent shape.Bushing is like new.Blue spring on driven with excellent tabs.I bought this used,in this shape and it has set in a drawer.Im asking 150.00 obo.Plus shipping in a flat rate box.
Driver is 3/4 bore and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.