governor

I have a doodlebug with a hemi preditor engine from harbor freight. Purchased a stage 2 kit from OldMiniBikes warehouse as well as the flywheel and spark plug. Running the standard hillard clutch. Governor is on and will remain that way. My end goal is a minibike for puttering around with that will do...

Does anyone know where I can get a Governor stop screw for the stock engine? I searched and could not find it. I just picked up one of these for cheap and I want to be able to restrict the top speed, but the screw is missing. I am going to get the Jackshaft from Pro Mod and otherwise keep...

I picked up this MTD minibike today along with an old Kohler K91. The previous owner was a lifelong minibike enthusiast; He completely restored it, new paint, bearings, everything. The engine isn't original, but I believe it's the same model engine as was on there originally, a Tecumseh H50. It...

Need a little advice on what to do to get my carb running smooth again? Did the air filter and header pipe knowing it would need a little adjustment but just don't know what is right? I have a .035 jet should I just replace that? Some say the e-tube? not sure would like some input! I was hitting...

When eliminating the governor completely and siliconing the hole closed, don't forget that over revving will stretch the spring on the automatic decompression mechanism mounted on the cam. All of a sudden you won't be able to start your engine. Too much compression. You need to replace the...

Hi guys, I have a really nice HS40 but someone took the post for the governor and installed it backwards trapping the governor gear. After hours and some help, the conclusion was we were NOT going to get this shaft out of the side cover. We eventually destroyed it in the attempt. I think the...

Does anyone have any pictures of the spring and linkages for the throttle. I have a 70 roadster with a broken governor spring and a bent throttle rod. Looking to see what parts I might need to buy.

I put some aftermarket parts in to my 6.5 honda clone motor. Comment on what els you think i should do to the motor Exhaust Before:stock greyhound exhaust Now: aftermarket custom header Air filter Before: stock greyhound air filter Now...

I found this at OldMiniBikes warehouse. Has anyone bought and installed one before. and is it worth buying. And can u run this kit with the governor installed or do I need to remove it before installing it. Please help

On the governor assembly internals ....what side does the thrust washer go on?? Thanks for any help.

Let me preface this by saying that I have not disabled the governor yet but I plan on doing so only after I have all the necessary parts. Anyhow here are my questions. 1. Instead of physically removing the governor arm and gear from the engine, could you just leave it inside of the engine...

First off I didn't paint the engine the crazy color blue. Bought off a member here.:scared: I was able to buy a h60 and stole the shroud off it because it had the throttle components that are extremely hard to find. My problem is my existing motor only has one governor arm and it's the one on...

May seem like a strange request to be looking for a governor, but this is a restoration after all. Briggs 3hp 80302-0016 What I am looking for is part #200 on this diagram: It has the arm coming out at 90 degrees to the vane, straight out towards the carb. The governor I have is for a...

Not sure when I will get to it but I couldn't pass it up. You know i have a soft spot for pacesetters. Not sure what my plans are...it's needs a head gasket...also all the governor linkages are gone...do they reproduce tbose?

Hi all, I realize this site is dedicated to mini bikes, but it is by far the best resource for modifying Predator engines. I'm a motorcycle mechanic and fabricator and will use a 212 Predator Hemi to build a longtail boat mud motor. It's nice to see how affordable these race parts are...

I unscrewed the governor half way last night and I was flying down the road; it felt like I was going 35+ I was wondering if this is bad for the engine to overide the governor like that... I have a lot more engine to go, it can be unscrewed a lot more, and I was just wondering the top speeds...

I got a hemi head predator 212 at HF last week, since then ive taken apart the governor assembly, removed the black arm that hangs inside the engine block but left the little cog inside.. do i have to remove this cog, or can it stay?

On my 2013 warrior, I got the 140 emulsion tube and a .038" main jet. It really helped with the lean condition and surging. I changed out the exhaust for a pipe and the mini RLV-91 muffler. I also got a K&N filter and adapter. I have ordered a 6 degree advance timing key. Next I will get a...

Why are there 3 holes on the governor lever? Mine came stock with the spring in the middle hole.(predator 212cc) Would putting the spring in a different hole change anything noticeably? Which hole would allow more performance? I tried searching on Google and couldn't find anything. Just curious.

Hello new to modern mini bikes got one for my boys mmb-80, who makes there engines, and is there a simple adjustment to adjust the governor, so i can ride, no power for my adult body