installing

So I finally got my TC2 GTC torque convertor in the mail. I decided to go with the GTC because it’s supposed to bolt right to the Baja Heat MB165! Turns out, that’s not the case. To start, the lower right mounting tab for the cover hits the frame. I could raise the engine using a plate from NR...

I have some questions about my Comet torque converter. I want to make sure I install it on my motor correct. It came on a 285 Manco Dingo back in 1986ish. When I received the kart, the driven part is still attached. I do see it has 3 buttons and one is missing. Other than that, I think I have...

lapping is over my head right now so is filing so I decided to get a 4* key. was hard to get out but managed. how do you put the new one in? its really tight, just tap it in or what?

My Tech OHH60 6 HP (about 2 years old) does not have either and I wish to install. The engine has the stock carb and stock attached plastic fuel tank. Has anybody done this, and can you share any tips for the installation?:confused: On this engine there is not much length of exposed fuel line...

So I'm nstalling my max torq on my new hf 6.5 right now. And the key seems too big to slide the clutch on? Has anyone else had this problem? Or am I being retarded?

sooo I have one of those long neck gas cap on my L shaped tank too. lame.... so i was looking for a work around. Would just a smaller cap work? or should i go to a new tank? i have a db-30 btw. anybody on here have any tips on what they had to do. I live in california so i have purchased the...

Are new gaskets to be installed on a clean dry surface? The manual for the engine I am rebuilding (Techumseh HS40) doesn't give detailed gasket instruction and I'm asking this question just to be sure. I've seen a lot of products called "gasket sealer" or something of the sort, but my...

i have a powerdyne that came with a headlight on it but wasent hooked up. i've been trying to hook it up with no luck. there is no battery or anything like that, but i was thinking of hooking it up through the spark plug. anybody have any suggetions on wat to do?

O.K. I have a couple of yellow springs that I want to put on a couple of my driven units. I have never tried taking one apart. But my buddy has and seems to have some problems both getting them apart(looks like he butchered them taking them apart) and he is not quite sure how it goes back...

What modifications are needed to make a TAV fit on a baja heat. My jackshaft is all messed up and I have a TAV .I held the backplate upto the engine and there are some clearence issues. Does anyone have pics of what is involved to install one .I dont want to grind off something I dont have...

I will be installing my ARC rod and Honda flat top piston soon and was wondering if it would be a good idea to apply bearing lube (instead of oil) to the crankshaft and bearing inserts?

1. What is the length of chain required? Is ONE package of #35 RLV Extreme Chain Gold on Black - 106 Links enough? Since the original chain baja sells is 70 links? I read here and there ppl say get 2 or 3 boxes??? 2. Im looking at getting a Max Torque clutch for #35 chain. Do I want the 11T...

Who the heck can put on tubless tires on a 6 or 8 inch rim, I Tried lawmmowers shops and a john deere dealer. No help there... where should i go?

First I want to thank all who have offered thier insight and tips. This has been a great forum for me being a newbee to the mini bike world. My question is that when I intall a clutch to the motor do I need a special tool. I have seen some for sale and was just wondering if they are...

My bro decided to buy a new cam for his gx160. It's the dyno cam with .308" lift and 245 degrees of duration. Before changing the cam, he was using a cam with .265", 236 degrees of duration, and a 22mm mikuni with #95 jet. It seemed to be working well like that. Shane from AGK gave suggested he...

I tried over on the 4 stroke kart forum but no one wants to help there so here we go here.. I am putting my world formula engine together and I am having a problem with the oil ring... The spring that goes behind the ring seems to big and it wont allow the oil ring to compress without...

OK, I am wanting to install bigger seats and valves into my 5 HP Briggs. I have a valve seat cutter kit to cut the seats into the larger seats you have to install. Now my question is do I need to have the new larger valve seats measured and cut into the block so I can press them in? Or is...

after leaving my doodlebug out all winter i thought i'd give it a little tlc, hit the frame with a rattle can and am putting the harbor freight 6.5 on it. my question is what else do i need to properly fit it and make it work as well is there any tricky parts of the install? any feedback would...

I want to use a walbro 22 mm carb for my kart,so will I have to get rid of the gas tank on the clone and go with a pumper.but I do not know anything about them,other than the basics. can someone tell me if it is complacated to set up? What makes the pump draw the gas to the engine? And...

Ok I bought a electric start kit off ebay from a seller in Canada , it took almost two weeks to get here so you have to wait a bit , it included a charging coil , Starter , Shroud , wiring , flywheel , starter box , I bought this kit for 80.00 pluss ahipping , I hope to use this engine in my...