Hey Guys! I'm starting to build a homemade mini bike. And i'm having trouble locating a rear axle (Since i live in Argentina and things are not as easy to find as in America). What i've found is a threaded rod that fits the wheel. It's 1 inch diameter, so pretty big. But it's threaded... do you...
This is a repop that I picked up in a package deal.
Very well made and exactly to spec of the originals. 5/8", clutch side is keyed and threaded (nut included), sprocket end is unkeyed and uses a roll pin (not included).
$21 shipped from 37618
Grab it quick, or its going on Ebay.
Top 2 seats $20 ea
Bottom 2 $25 ea
Sebac shocks- $30 pair not stuck but could use new paint.
6" manco whee with Carlisle universal tread tire. Bolt stuck in one of the holes and rim of one bolt hole damaged check photos. Threaded holes on both sides for sprocket...
Where can I find a bolt in this size and fully threaded? Looking for a 4" fully threaded 5/16 bolt. Preferably a 3 1/2 Allen head or a 4" hex head will work too.
Hi guys, I bought a new in box stock Raptor carb and I was looking at it today and noticed that it has a threaded hole in the bottom of the carb, which looks to be for if you are running a stock style Briggs air filter to put the bolt through and screw into. The problem is that I will be using...
I received another 3HP Briggs & Stratton ball bearing motor with a threaded 5/8" shaft and was wondering if I should add a keyway on the shaft.
I have used clutches on threaded shafts before but I usually just drill where the set screws will be and then tighten it down. I would rather have...
This is a 5/8" keyed and threaded shaft 10.5" long.
Its a BMI item and retails for $26.95
5/8" Jackshaft with Washer (02014), www.bmikarts.com : BMI Karts & Supplies : Go Karts Parts : Racing Go Kart Parts : GoKarts : Versailles, Ohio : USA : Indoor Track : Tips
$25.00 OBO shipped anywhere...
Here's a Manco six inch rim that's threaded on
the one side to attach a sprocket.
Threads are all good, rim has many nicks
from years of george3 kind of riding.
Bearings may still be usable.
Proceeds from this item go to Evil Ed's
Windber 2012 fund.
$40.00 Delivered to any of the lower 48...
Anyone know what size bolt fits the internal threads inside the shaft of my new Tecumseh powersport 3.5 engine? I don't seem to have anything that fits in my spare bolts and don't know what to grab at the hardware store. THanks!
Is there any advantages or dis advantages to having the 4 raised threaded holes on the cover? I have one like this, and some flush with the cover.:shrug: Can the raised boss cover be used on any 5hp application, this one has the dipstick tube. Thanks Mark.
hi im looking to make a threaded header. what home depot pipe will fit in my exaust port.? im waiting for some cash for a costom header but till then i want to try different lenths and shapes. i have access to black gas pipe at my pops house will it fit?.i know from my smokin days that copper...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.