I was hoping to have the bike ready for a race this weekend but that's just not happening at this point. I have a project on the house that takes priority this week so not enough time to work on the bike and the walburo pz22 carburetor I ordered should have arrived at the beginning of last week and still hasn't so something has gone wrong. I contacted the seller and he's looking into it.
I did take a little time off from the house project to get a little work done this week. I just found out the front wheel at the bearings is to wide for the forks. I had to pull the forks apart to put the wheel back in and they are spread so wide it binds the outer sleeves and wont let the shocks move freely. now I know why it was so hard to get the axle out when I took them apart. I either have to modify the forks or the wheel to make this set up work or I need to buy another front wheel. I'm defiantly not messing with the built in spacers on the forks in case I find an original wheel. so that leave only modify the wheel or buy another wheel.
I did take a little time off from the house project to get a little work done this week. I just found out the front wheel at the bearings is to wide for the forks. I had to pull the forks apart to put the wheel back in and they are spread so wide it binds the outer sleeves and wont let the shocks move freely. now I know why it was so hard to get the axle out when I took them apart. I either have to modify the forks or the wheel to make this set up work or I need to buy another front wheel. I'm defiantly not messing with the built in spacers on the forks in case I find an original wheel. so that leave only modify the wheel or buy another wheel.