Recent content by Heidle

Anyone know what the speed rating is for the stock ct200 tires? I've been advised by some not to go 40 with the balloon tires that are on it although I didn't have any problem when I went 40 with them.

At normal and clutch engagement RPM it's just fine.

I just upgraded my Coleman bike. Does this sound like a misfire? My flywheel timing is 31 degrees and the camshaft says the ignition timing is 30 degrees. Idk if this makes a difference

Hey guys, I recently rebuilt my Hisun 196cc motor and when I run the engine it idles roughly. Here's some specs 18 LB valve springs PVL Aluminum flywheel with 31 degrees BTDC Billet con rod governor removal BSP-2 cam Everything else stock The engine seems to run fine at higher RPM but at idle...

No problem, thanks.

http://www.nrracing.com/product-p/dynomod2.htm?1=1&CartID=1 Here's the cam I'm interested in. I'm pretty low on money so I think I'm going to wait on the new cam and keep the money if I find any other problems on the bike.

Jackshaft

Anyone have a good guide for buying cams? I don't really understand cam timings.

Hey guys, so this is my first time posting on here. I'm currently rebuilding my Hisun motor from my Coleman CT200 and I was wondering if I should get rid of the plastic camshaft gear soon. It just seems very sketchy to me to have a plastic camshaft on the motor. Here's a list of mods I have...