Search results

My Go Devil has been sitting on the shelf for several years now... I need a friggin gas cap. Know of one (or a complete tank) let me know! Thanks!

Big FIVE OH in less than a week... If I could just remember all that I know, I'd be a genius.

Good news! I found the problem... I re-cleaned it and again found nothing BUT I found that the center tube that likely acts as a main jet (does not have a real 'jet') was stuck down into the bowl. It has a spring in the bottom of the bore (in the plastic float bowl). When I pulled the tube...

I've got that same throttle on two of my bikes. Works great and Hent's right, the bigger grip is a plus...

Heck that's not rude... With all the plastic I knew it was crap. I have a Walbro PZ30 but I need to play with the jetting. I THOUGHT I'd put the stock carb back on and connect the governor just to get a base-line on how it was running before tuning the Walbro. I knew I'd end up re-cleaning the...

Just about done with the build and now I'm having problems with the stock carb. This is a brand new (old stock) motor. Ran fine about a month ago but now it only idles. Any throttle with the choke off, it trys to die. Choke on, rev's up... I've never worked on this (new) type carb with the...

Used the stick-on chrome 'vent' to cover unused factory holes in the blower cover. Little cheesey but not too bad...

12v elect start!

8" wide rear tire

Hand fab'd brake. Springer front (BMI)

Custom intake/filter

Sprung seat, hand fab'd seat bracket & fender supports.

Hand fab'd stainless 1-1/4" exh and SS battery box.

Comet Maginum 44C / 40 clutch.

95% complete! Almost 8 feet long with a Sportster tank and forward pegs.

If anyone has a Go Devil (folding minibike) gas cap or a tank/cap you'll sell, message me! One just sold on eBay about a week ago and I missed it... Still pissed.

You gotta be S****'n me? Banned for that? Wouldn't go back anyway. No doubt all forums should have some rules for overly offensive behavior but that seems a bit overly holier than thou. I wouldn't loose any sleep over it. Sc**w'm.....

Tractor Supply also has the brass bushings. I make my own from brass or bronze if the size is oddball. Take a chance you can modify one the standard 5/8 from Home Depot, Lowes, Tractor Supply etc. Thats the best price. All else fails, message me. Good luck! Don

I picked up (after looking for several years) a complete Go Devil minibike. I need a tail light complete or at least a lens, I need a flilter foam (can make one if I have no luck). I also need to find a gas cap and figure out new steering head bearings. No idea if thats all I need... Just...

I've got a buddy who started out back in the old days in top fuel "Nitro" drag racing and now into Mototrials and the GAS GAS Tech guru - He says the higher the octane, the SLOWER the burn which is why it helps with detonation. I'm pretty sure the gain will not be noticed at all in a motor that...