Hey guys, haven’t been on here since around 2016 so it’s been a hot minute. I’m based in New Zealand so our choices for bikes are pretty slim and because of this I decided to start building a custom bike. It’s gonna be very small hopefully around the size of a Tom Thumb mini bike and will be...
Hey guys so I'm having an issue with a bike that I'm building basically I've put a 196cc clone engine on and put a larger jet and pod filter on now when I start the engine the the idle is quite high and the throttle sticks even though everything I can see is springing back even the throttle on...
Hey guys so basically I've got a mini bike frame which I'm doing up and everything's going well but I'm having trouble working out the size of the sprocket on the rear wheel it's a 50 tooth but I need to figure out the pitch and what not for getting a clutch it looks bigger than 35 chain so any...
Hey all im currently in the process of putting together a Deckson Daredevil mini bike and the current handlebars are stuffed as the previous owner had welded them directly to the forks I was wondering if anyone in Australia or possibly New Zealand would have any old forks that suit these bikes...
Hey people so basically I have a tiny little 2 stroke Fox Motori Engine and it has a 12mm keyed shaft I was wondering if I would be able to put a normal centrifugal clutch on it as I have seen people put a centrifugal clutch on the little Ohlsson And Rice engines so is it possible to put a...
Hey all I was wondering if anyone on here is located in New Zealand and knows anyone with a frame that they might sell,At the moment my plans are to either get a frame and put a 6HP engine on it or just make a frame to fit the engine. Im looking for a frame style similar to that of a Tru-Test...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.