blaster

Can someone tell me how I should go about getting this rim disassembled? It has the four bolts running through to the other side with washers and nuts keeping it together. I have removed the nuts but can't get the rim to separate. I have the studs soaking in PB Blaster as well as the axle. It is...

Before and after cleaning with PB blaster and steel wool. Practically wipes off

I cant be the only one to do this but I gotta ask anyway... The other night I opened the head of a Tecumseh H60 and the piston and valves were thick with burnt on black carbon deposits. I just happened to have the PB Blaster nearby and shot a little on it. My God it practically wiped right...

Hello Guy's. I wanna buy one of these to clean paint of my bikes. They have 3 to choose from. A 20#, 40#, and a 110#. The people at the store told me that the only difference between them is how much of the blasting medium they hold. They said that all of them would run off of the same air...

Sand blaster

Sand blaster

I know we dont talk values but I can possibly pick one up in nice shape that hasn't been run in awhile but its 500 bucks but I have no clue if thats out of line for a quad ?

anyone use a soda blaster on a good running motor.I have a 100cc motor that does not need a tear down just detailing.I was told that the harbor freight $100. blaster is the way to go.I know all the ports have to be sealed.It seems real safe for aluminum.I was looking for some feed back on your...

Well I got the kart back from the blaster today. Was pleased to find everything was in pretty good shape. Had some pitting around the seat pan. Don't think that I am going to do anymore than paint. Does anyone think that I should take the time to spot fill the pits, or should I just roll on?

Hi does anyone know if you can swap the engine on a yamaha blaster with a briggs or tecumseh. I may have found a blaster with a possible bad engine and have a 8hp briggs on hand. Any info would be helpful.

well here is my wonderful fourwheeler iv been redoing its been powder coated and has ALOT of new parts and pieces right now as the bike sits it has about a 1000 worth of new parts and other stuff in it and its no were near done it will be one bad bike when its done here are some pics before and...

Has anyone used a gravity feed spot blaster gun? I understand that i will have to be refilled alot but its cheap and i only need it to sand blast my frame for the show thats coming up soon. What sand do i use for it? what best for the frame and wheels? Im wanting to get the whole bike...

Here is a link that tells how to make a soda blaster vary easy and would not cost much. E

15 Years ago I bought a Harbor Freight pressure blaster to build my "Pro-Street" 1967 Nova. Since then I have used it on a number of car and minibike projects. I originally put a better water seperator on it and re-welded the leg on the bottom of the tank. I have had to replace the ball valve...

I made me one heavy duty sandblaster nozzle assembly today :thumbsup: There are few guy's selling them on ebay for $30 shipped which isnt bad but I had some parts laying around in the garage and thought why not try to make one myself. the only thing I had to buy was a 2pk of ALC 1/8" nozzles...

Theisen has an ad out for a GRIP 10 Gal sand blaster for $64.99, I Picked one up today, Good price! Never seen these this cheap around here.