changed

I am trying to date a piece of Tecumseh memorabilia, and would like to narrow down how old it is. Does anyone know what years Tecumseh changed its logos? The piece has the red Indian head with a red box around it, If I had to guess I would guess the 60S? Sorry I don't have a picture at this...

So all my stuff that sat a while was recently given another chance to run, minis, trikes, and one full size tractor that had run less than five years ago or less simply would not run and the gas had turned to gel and crust depending on whether it pooled or not and the task to clean it all up is...

Here's the new address

Looking for a stock doodle bug engine. I'm not new to the site. My old account I changed,emails and lost the password so I couldn't recover it.the cheaper the better I'm located in chardon ohio

Finally, FINALLY got to the bottom of the horrific "grinding/binding" sensation at mid-speed / mid-throttle on mine and the wife's 6.5 Tecumseh modded Doodlebugs. Two years with those things shaking our teeth out! Well, we didn't even really ride them last summer because it always felt like we...

okay so i bought a new honda clone engine i broke it in changed the oil etc then i went and removed the governer and changed the valve springs aswell as a new header, while doing this i broke the gasket on the sidecover and unfortunately lost a dowel pin aswell. i havent done the valve lash...

Hey everyone! Hitting off NewYear good with some work at home for about next 6-8 mos. I'm going to go easy on the jeep project because its got rust issues so that means I'm back and going to take a stab at a Drag mini. Have some questions because site has changed. I know pics I posted were...

Could just changing from the stock filter to a cone style filter cause my predator engine to take several pulls to start? Maybe I need a bigger emulsion tube /jet?

I measured it when I took it out and 8 oz came out. I drained and re-filled with 10w30 and put 12 oz back in. The manual says to not screw the dipstick back in the check the oil, just sit the cap in and check. It's showing just about in the middle. Sound normal?

It's been three years that I have been a member...... My life will never be the same.:laugh: Thank you to everyone who has helped with all my silly questions. Put up with my dumb posts. And especially help change my life for the better. I couldn't ask for any better friends than I have...

It seems like when you search it no longer searches for the key words? It's searching for anything that maybe related to your keywords as-well. Very, very annoying. Has this just changed?

I changed the crank out in my engine and the new crank that I put in has multiple timing marks so I put it on the mark that was notched and now it won't run at all, it feels like the engine is retarded timing. I put it to top dead center where the magnet lines up on the flywheel and the rod cap...

Hi,anyone still interested in the Clawson 4TH OF JULY PARADE,please take note: The parade date has been changed now to the 5th OF JULY.I know,this sounds a bit rediculous,but they had an issue with a local Church that happens to be in the parade path and obviously,this parade would disrupt their...

It turns out my little fortune cookie that could takes Honda jets just fine. I put in a #75 main jet from a GX200 and it really liked it on E85. Are there bigger factory sizes that I can use or do I have to go with something drilled? I can drill the little stocker with my hand drill set, but I...