cranks

I am having some made in 3/4 and 5/8 diameters if anyone is interested send me a p.m. Recently needed this tool for two different cranks and didn't have it. Carplay lent me his and it went super smooth and no problems:thumbsup: The cost should be about $15.00 plus shipping in a small flat rate...

Several crankshafts for sale, along with a couple miscellaneous parts. Clements Racing 3.000" stroker Briggs crank. $150 shipped. Clements Racing 2.937" stroker Briggs crank, $150 shipped. Tecumseh H70 crank, offset ground to add .250" extra stroke, bringing the total to 2.75". 1"...

5hp Briggs crank with 6:1 gear reduction box Nearly new Briggs 3.5hp crank with 6:1 gear reduction box, $10 each plus shipping

Are Predator crankshafts as strong as Honda cranks?

2 cranks, both in good shape..no bearings with cranks.....journals measure out 1.060 $35 o.b.o plus shipping for both cranks..

once again its come up of someone wanting to drill a crank and not having the tooling to do it . im looking at making tap and drill guides for doing cranks . it would have all the stuff needed to do it .... well other then the drill and a tap handle . but a drill guide and tap guide . the tap...

looking for two briggs cranks, 3/4 keyed...short or long snout on the flywheel side... must measure .998 or better... no scoring or chips..

:confused: i was under the understanding that all rupp engines had the three inch cranks if not what year did they change???

1. GX160 Genuine Honda crank $35 free shipping 2. GX200 clone crank $25 free shipping

I swear to God I'm about to junk these SOB's... I pulled out a motor to play with today.. I forgot I even owned the thing until I got to digging.. I got it at the junkyard this past summer.. Gas tank beat all to hell, two screwdriver holes :confused: Side shield all beat to piss, dipstick tube...