fail

Ok I have a old style doodle bug with a slightly modded predator it goes over 40 mph and the stock brake doesn't stop as good as it did with the stock engine. I was going to get a hydro brake from parts for scooters but have been reading that they fail ripping off at the bolt . Is there another...

I wonder what happened to the guy that built this one::doah: Engine Explosion dyno room - YouTube

Note to self. Whenever getting old engine started after it has set for God knows how long, always oil recoil clutch. They tend to screech and thud and ball bearings go everywhere. Now what to do. I had another, but want to use the old shroud. The clutch hub is stuck in the shroud like a biatch...

So I started this 3 horse Briggs today on an edger and it takes off. It revs up high and goes crazy. I put the throttle all the way down and it didn't stop! I tried to stop it by taking the lead off the spark plung and, :censure: shock the :censure: outta myself. Then I get needle nose pliers to...

Wrecked my bike in the drive way doing wheelies etc thank god I had a helmet as it got a huge scratch in the side but this is my arm

YouTube - Tractor Pulling Fail

Needs a visor

The kids I bought an old rare Victor minibike from had a 5/8" clutch and a 3/4" shaft so it looks like they peeled the shaft down to about 5/8" with a flat file!