halves

Why is it such a pain to get the haves of a two piece rim off the tire on a mini bike? In the process of mounting a new tire on a new rim I put hole in the tube so now I need to get the rim halves off the tire to put in a new tube and it is proving to be almost impossible. Before mounting...

6" lil Indian mag wheel Two halves are good Two halves are broken $75.00 OBO shipped THANKS for looking and if you need more pictures let me know.

In search of a good, complete 6" Manco wheel for the front of my Delta 1. Need both halves. Located in Lancaster PA 17603

I saw somebody post a question about Go-Power wheel widths on Bonanzas and it reminded me that I took these pics a while back. While the regular Go Power wheel has equal width halves...the Bonanza Kidney Bean wheels have a shallow half and a deep half...and the alignment key configuration...

Hello OldMiniBikes'ers...Papa needs mini bike money!. Rear wheel half for a Powell. I had it chromed, but not a great job. You can see the yellowing around the center and it has a spot where the plating is not great...it's about a 10 footer! That's the bad...the good is that I ROCKED new brake...

I dont know if anyone has a use for these or not, they are 6" 2 piece wheel halves, I dont have any hubs, they are the 3 bolt like used on fox and others. no damage or pitting on them so if you have a rusty or dented one maybe a good replacement. I have 4 total $6 per wheel (with...

All three halves are the wide side with the valve stem hole. 24.00 each It may take me a day or two to responde to a PM

I searched and found nothing directed at what I am trying to accomplish. I saw that someone had some of their halves 'tumble polished'. I dont have access to that, and this is going to be a low budget project. What are some methods, (by hand) to clean most of this oxidation off?

These are the wheels that the brake drum/brake assy/70T sprockets fit that I have listed.These are halves and have the 3 drum mounting holes drilled and tapped for a 5/16 bolt.The white one has one of the threaded bosses chipped out about half of the thread.So you would have one wheel and a...

Im selling a box of split rim halves...There are 7 halves that I can find...These need bearings, some hardware included. Rims are in decent shape, 1 is broken and possibly not usable, there is another half that has part of an axle stuck in it, not sure how you can get that out.....Im looking...