h.p.

The Heald trike from Jeep 4 me ready to rock harder now. A fresh J19-LM gapped to .030. A slight rock to engine at idle. Due to no parking brake there is belt/whoa horsey creep when idle dialed till it runs smooth as silk so it was backed down till it started to stagger.. E.P.A. built in...

Hey guys picked up this frame a while back as a freebie,and finally getting around to working on it.used to have an old minibike as a kid,cant remember what make it was.This bike started dirt/doodle bug.figured i'd kinda old school it a bit by removing the fenders,and their mounts,rear grab...

Fresh Motor By Enzo. Custom built Max Torque clutch and Piped. Ready to go. $435. Shipped. Lots of goodies and custom built. you can't build a good motor for this with a lot of his custom work and touches.

Seeking HP and year of date of a old Briggs,engine # 61102 940558 620312 I recieved a free old school Sears Mini Bike for free, NO spark, rust totally thoughout gas tank, carb shoot, Just woundering if it is worth fixing it up:shrug: I been to The Briggs Web page but can not figure it...

Ok, motor #3 in my Christmas Clearance Sale........ Sweet looking vintage Clinton 4 HP. Always thought it would look great in one of the utilitarian bikes; Tote Gote, Pak-Jak, ,Mule, Trooper, etc. Just never found the right project and now that I found a Powell for a rider I will probably...

I found a 7 horse Briggs lighted electric start flathead nearby. Will that work on a minibike? It's on a snowblower and the add says it has a clutch that is the same as a minibike but it's teeth are shot and needs replacement. Engine runs and starts great. I did a search on 7 horse Briggs and...

Need to change to longer crankshaft for clutch. Engine is a Briggs 3.5, model 94212. Type 0319E1. Or does anyone have a part # for the longer crank? Thanks! -Bruce

Hey all, new to the forum. NOT a motor expert. Thought you all could help with my little problem. Purchased a new HF Clone 6.5. Installed the motor on a 1961 Wheel Horse Suburban Ball Burner tractor. The tractor originally had a 5 H.P. on it but had some issues. Had to remove the gas...

I've got a new Briggs Vanguard engine, and was wondering if I need an exhaust specifically for the vanguard, or will a Flathead, or an Animal muffler pipe work? (Without Modification):grind:

THIS WILL BE A VERY LIGHT MACHINE, ALL ALLUMINUM WHEELS, I WILL SPORT A QUAD FRONT TIRE IT WILL JUST MAKE IT WITHOUT HITTING THE U RING.

How can you tell the H.P. model of a tecumseh flat head if you don`t have the model numbers? I have a couple of TEC flatties from back in the days but my kids got to them and I`m not sure of the sizes. Whats an easy way to tell with out taking it apart? If i remember they are 3.5 hp to 5.0 hp...

could anyone tell me what the initial carb settings should be? i can't remember off the top of my head but i think it's a hs50? i can get it running if i keep pressing the primer but i can't seem to get it to run any other way and it's driving me crazy! i've taken the carburetor off and...

Does anybody know if the side engine cover on a big 4 h.p. will interchange with a 5 h.p. cover. mine has a extra shaft that I want to eliminate. Thanks

I have a 5 horse briggs that just quit on me! I am getting no spark.I took the coil and flywheel off and there id what I believe an alternator under the flywheel.There was a lot of debris in there so I cleaned everything up and put it all back together,setting the air gap at .013 and I still...

Hi, Does anyone know about a starting issue on Tec's where the recoil starter keeps locking up solid,just about every other pull? I can feel air coming out of the head at certain times during the cycle,but doesn't the exhaust valve open up for the air to go into the exhaust manifold only,or...

I have been searching this planet for a white 3.5 h.p. tecumseh engine for my mini bike restoration. No luck so far. Engine must be from the early 1970's preferably 1971. Engine must have a 3/4" inch shaft. Sold through Sears will NOT work. Engine should have the flag decal on the shroud. I am...

have a 4 hp tecumseh, which cranks easy and runs well till about half throttle,,then it starts missing ,like its starving for gas.. so i tightened up the screw on the very bottem of the carb. got to top end with no problem. but now it starving for gas when you first throttle up...i have not...

Ive got an old go cart the kids ride in the yard.Has an old 5 h.p. briggs engine on it.Yesterday it started acting up it will idle perfect but try to give it some throttle and acts like its running out of gas.Choke it and it starts right back up.This is engine with carb mounted to top of gas...