magnet

I have a 79cc predator engine, and I'm looking for a way to get generator power directly from the engine. My goal is to power a 12v electrical system (headlight, tail light, brake light and battery), in the simplest way possible. I know that if I attempt to hook an accessory wire directly to the...

I have several cast iron Briggs & Stratton flywheels that are coated with rust. I'm wondering if there would be any harm to them if I were to soak them in Evaporust followed up by blasting them with glass beads? The magnet would be masked off during the blasting process. Can you think of any...

Hey yous, I opened up an HS40 last night to say hey to the inside for the first time since picking it up and I found: 1) Two broke off fins of the plastic variety 2) One of the magnets is not glued but simply sticking on with MAGNETIC FORCE! Should I track down a new plastic fin...

hi i need to know which way the polarity is if anybody knows facing the flywheel as it spins clockwise is it north-south or south-north? got a lil idea up my sleeve ;) cheers

I bought a used tec motor. They guy I bought it from said it ran but has problems starting. So I thought carb issues not a problem. Well a couple things I noticed on my first start. Carb leaked. Rebuilt carb. stopped leak. Pull cord has been shortened. Which jives with his claims of problems...

Pulling this '75 Rupp hs40 apart and found 2 of the air gap spacer/timing :shrug: thingy's are loose from the magnets. whats the best adhesive or is there something specific that needs to be used on these? Looks like it may have been some sort of epoxy originally used?

Im assuming the magnet next to the flywheel is the coil, just never really thought about it...Am I right in assuming this? Also, what is the spacing between the magnet and flywheel. I just kind of judged it by sight, but have a feeler gauge now, and can place it within spec if someone was so...

When installing a magnet for a vapor, on a Puma, I would like to put the magnet right under the lip of the rim where the tire meets the rim. When I JB-weld this magnet on, does it matter how the magnet faces the sensor? As in, can I just put the magnet on the rim how it is naturally...

I have wondered if a stronger magnet(rare earth,ect.) would give a stronger spark from a stock coil pickup?...Is the magnet on a hi-po billet flywheel stronger than stock?...And how much does the stock magnet weaken over the years?...any ideas?....Scootercat....