options?

Howdy folks - hope this is the right section. I've got the mb200 with the Predator 212cc motor and a torque converter. The little beast runs out well and I'd love to make it faster but the rear only brake option really sucks. Is there a kit yet for the mb200 I can buy and bolt and go or...

I could use some advice on choosing some better tires for my Azusa with 6 inch wheels. It has the standard 4.10x250x6 tires that I assume came with the kit when it was new. We live on a dirt/sand road and the bike can get real squirrelly with these little tires on it. What are the tallest tires...

I went for a ride a few days ago. The road we were on is a dirt road with a 30 mph limit. It's all graded with little traffic. There were a couple small hills and the TAV took me up them with zero trouble. My motor is sputtering a little at peak rpm's, so I'll be checking that out this week...

So I removed the charging coil on my 6.5 Honda clone to add a billet flywheel. Is there a simple solution to power my head light now besides a battery? I really won't need the headlight very much. But I'm building a complete custom baja mini, and it wouldn't look right without the head light.

looking for options/pointers/suggestions. I need one for my HM80 build, and have no idea where to start. Can any billet wheel be run if it fits on my shaft? I've heard of people running 3hp flywheels on bigger motors, does this not affect the balance? I'm a noobto small engines, sorry.

HI all, I was wondering if 18x8.5 turf tires were the only option for my Hilltopper. The tire on there now is in pretty good shape, bit it is a very square profile with more of a turf tread style. Are there any ATV (knobby) style tires available? I saw one 18x9.5 knobby, but I assume this...

Does or has anyone done hopups too the OHH 6hp tech motor? I'm looking for some extra HP nothing crazy.

I was looking at the BMI jackshaft kit and was wandering if anyone has used this on there mini. I have a couple of stock doodlebugs that I need to do something with. BMI has different tooth options for the jackshaft gears, what would be my best route on that? The bikes are ridden by kids...

well, since I put the factory air filter on the bike, my screw in muffler and extender pipe no longer fits due to AF interference. any options other than the factory box muffler then? kinda want the exhaust behind me, than ported out next to my leg:D

I'm looking for some grip options that will give me more cushion when riding on the dirt. Unfortunately, it seems a bit tough to find a set that has a small enough ID to fit properly. Has anyone switched theirs out to something different? Thanks.

i got a new sprocket for my minibike because my old 40 tooth sprocket was badly worn. so i ordered a 72 tooth, well.. lets just say i think left hand turns are out of the question now, its only about a half inch shorter than the tire! i have a 4" rim and would like to keep the original rim if...

Just wondering what you guys are doing after you've moved the gas tank off your clones and used another tank mounted on the frame infront of the seat. I now have this ugly empty space on the bike and a nice place to put something. Just wondering what you guys have come up with. IE fake NOS...