suggestion

Hey guys, I've read a ton of threads but thought I would just ask outright. Over the summer, my son and I built up a predator motor for his (and mine lol) minibike. We have been running a 14cc head which my son ported and polished, stock sizestainless steel valves, Mod2 cam, Arc Rod, 1.3...

i have a murry i am playing around with it has a tecumseh 3.5 ( needs carburetor) but i do have several clones and flat heads. any suggestion on what would be a good options for playing around . thanks mike

do we have a relay system here,like other forums? a thread,section,whatever? a thread where other members can ask for help in getting minis to their destination? for example,this very thread here,http://www.oldminibikes.com/forum/complete-mini-bikes/101275-tote-gote.html#post873524 im going to...

i built a pred engine for my minibike and it goes around 40-45 mph and i want to go faster so i stoped off at the store and bought another 212cc pred non-hemi "old style" and i would like to build it and get it to go 60-65 mph, so i need alittle help on what setup combo that would work best to...

Picked up an old speedway bike at a garage sale. Pardon the noob question, but what type of new engine do I need for the slanted mount plate? I'm not looking to restore it, just want to have some fun with it. Can I put a bigger more adult friendly engine on it?

I'm building the bike below in the Projects Forum. I have a question about securing the forks in the steering tube. The steering tube is about 6" long 1.25" OD and 1" ID. Right now I just have 2 washers tacked in place (on top and bottom on steering tube) to shim the 1/4" bolt that goes down...

I've got a suggestion. I know we don't have specific sections on our site for different MiniBike types, but I think we need a section under General Minibikes just for Mini Cycles, all mini cycles. I know I would like to go to this section and read about Hondas, yams, Kawasaki's, ect. New and...

I'm new here. A few years ago I bought a vintage (1982) Bird go-kart that had sat outside for a while. It has a Tecumseh H30 35324N horizontal engine. I fianlly dug into the engine and between the water damage and the previous amateur repairs I think I'd be better off replacing the engine...

I participate in the Thunderdrome races here in Detroit.... My ?s are My front end seems pretty sloppy, I was considering trying to have a new one made but if someone in the know has a good suggestion for a cheap alternative that would be fantastic.... Rigid would be preferred and something...

i am about to buy the 6.5 greyhound engine from HF for $139 what is a good clutch to use on this? is there a cheaper 6.5? :helpsmilie: