swingarm

Here's a vintage minibike rupp swingarm that's in great, the only problems are that its old and the paint is worn off, which can be repainted easily. $10.00 plus shipping, Torrance,Ca.,90501

If anyone is redoing a full suspension late 60's Rupp right now and have it apart could you please take some measurements of the swingarm for me??? Need width at the pivot bolt and length of arms mainly, its for a frame I want to customize and need to see if one of those swingarms would...

Must be clean straight and rust free looking for 2

The swingarm has a tab welded to it, and one on the bushings is missing and the other is broke. 25.00

Bonanza swingarm roller for sale. Has 6" Go Powers,60 tooth sprocket and working drum brake,working front fork and rear shocks,jack shaft.Good fenders and Bonanza badge. Prefer local sale for $250. May ship for an extra $120. Could be cheaper if you don't live all the way on the east coast...

Do i have to have these pressed in and out?..Gave them a couple of good whacks with a hammer and punch and they didn't budge.

Can anyone supply detail photos of an early round tube Taco 44 swingarm? I have pics of the axle end, but need the configuration for the frame/jackshaft? mount. Thanks, SW

I know nothing of who built this frame, but am hoping someone can recognize it and give me a clue. Jim:anon.sml:

I'm looking for a swingarm and rear fender, for a 71 R2, with the original lavenderish/purple paint. The paint on the rest of the bike is in good shape so I want to keep the bike original. Would consider the optional chrome rear fender if someone happens to have one. I have some 71 parts...

What you see is what you get. If it isnt in the pic I dont have it... with the exception if the right fork leg. Tank and fender are in decent shape. The front fender Mounting holes are wore out but nothing a little epoxy wont fix. The tank and seat combo has cracked near the end of the...