tear

Did you ever have one of those days where someone with a higher power was looking out for you? I did. I finally received my "new" H60 Tecumseh (the one I need a crankshaft for) this morning. I was anxious to get inside it and see what I had (and what I needed to find), so I tore into it. First...

I know what you're thinking and it's not those ones. It is the ones that look like the taco shocks. There's seems to be some decent compression and wanted to clean them up and use them on my bonanza build. There's some dirt/mud/grime stuck in the overlapping housing. Has anyone takin these apart...

My super grape 2 came in for my rupp rascal is any one on here using powder coating. i'm going to do the tear down this weekend i think.

I hope this may help someone out , as some may know I broke the caliper on my Flymingo DB at the lower Alabama Spring Fling , it was basically new , maybe 2 hours of ride time . So I order a replacement caliper only from Hot Rod Mini Bikes , today I spent nearly 2 hours trying to refill the...

Need some help picked up a all original super clean Briggs today.Has a one inch shaft model number 202051 and vin # 345496 from what i can gather its a model 14. Looking for the year and HP any help would be welcomed. Thanks Robert

Parting out a Power-Dyne chopper. This listing is for the seat only. It's a true original Mesinger Seat. Has a tear in upper corner (Shown) and underside. Even with tear on underside t still holds strong to the pan. This seat in great survivor condition. You don't see these very often not even...

Bike has been in family since new thanks to Bob fragoman I got a new top end! I just sent cylinder out for a fresh hone and now in process of putting back together the kawasaki 98cc engine and then ride a bit before I tear it down to restore. The bike was running before but decided after 34yrs...

Thanks to Bob fragoman I got a new top end! I just sent cylinder out for a fresh hone and now in process of putting back together the stock kawasaki 98cc engine and then ride a bit before I tear it down. Bike was running before but decided after 34yrs It could use a little rebuild. :scooter: I...

Just picked up a 208 from a generac generator. Can anyone tell me about what is a 208? I will post pics when I find time to tear into it. Thanks

mike bike tear down

mike bike tear down

mike bike tear down

Rebuild a Jeep under 4 minutes - YouTube

So I recently bought my 2nd 212cc and was mainly going to use it for spare parts and available cores. I had to go back to hf for something totally unrelated and while i was there a guy was returning his predator 6.5 because he needed a 1" shaft. I commented to the cashier that i had to but a 2nd...

Here it is, you decide if it works for you. The front weld for the mounting bracket has partially separated. 25 dollars plus shipping, or trade for a seat for a Cyclops by Clark Mfg, or Cyclops fenders/chain guard. Thanks. Seems to be a well made seat.

I had only seen these for ridiculously high prices (like 80 bucks I think!). This is el cheap-o for these tanks. Just don't forget, they dont come with a petcock/fuel shut off valve. Oh, and as for the sale ends in 1 hour notice, that was there yesterday :), BUT, yesterday the cheapest one...

ok so we started taking the motor apart man that was a pita the head bolts were rusted in and sucked getting them out( i got a bad elbow right now) i actually had to get some one else to do it for me well anyway after getting the gas tank, head, and shroud off i get a look at the valves and...

Ok so in the coming days i will be taking this apart for a small motors class and im just wondering if there is anything i need to look out for.