torque-a-verter

I want to replace the belt on a old Torque-A-Verter bike lit. says its part # B-1038 7" Asymmetric / Mod # ZCQ-18735A 73 or 74 yr. numbers aren't helping me on my search... I have 6" Driven Center distance 6 5/8" - 5/8" top width. The charts are very confusing & I'm not finding any chart with...

I have two complete COMET TAV-2 30 TORQUE-A-VERTER UNITS. Absolutely NOS CONDITION. Both units are for 1" PTO shafts. #40/41 chain 10 tooth sprocket. $250 each + shipping. I also have one NOS DRIVER for 1" PTO shaft. $80 + shipping. These are the real deal made by Comet when precision...

Cleaning up /polishing the surfaces on this TAV 30 torque converter, these two minibikes sat in storage for a long time...little pitting but some fine emery cloth and steel wool is smoothing it out nicely

Sleeve loose on this torque converter, hope this holds

Is this Tav2-30 torque-a-verter good for my briggs 8hp? Is this setup complete?

Hey all, Looking for a comet or equivelent, 3/4" driver for a MTD trailflite. Bike came originally with a Fairbanks - Morse unit, and currently has a cheap Comet knockoff that doesn't engage properly. I am also looking for a manifold to adapt a Mikuni 22 to a 5hp Briggs flathead. If able...

I'm running a torque-a-verter on my HF 6.5 clone. I'm having some problems with erratic/jerky engagement and the driver pulley is getting pretty hot. I'm pretty sure it needs cleaned and lubricated. I'm going to order some of the comet torque converter dry lubricant. My question is...Is there...

When its on and evryhting it is soo tight that i cant pull it because it grabs wayy to much, it just seems to tight, any ideas on why it may be wrong? the only way i get it goin is by spraying one of the pulleys with wd-40 so it slips, so then when it starts and it slowly burns off, it...

hi, I'm new to the forum (first post). I was wondering if anybody could help me find a CVT or TAV for my 6.5hp mitsubishi? The engine was on a firehawk but now its on this custom bike i built. I dont have the 200 bucks for a real torque-a-verter so I was wondering if there were chinese clones i...

Hi all, I just bought a new Baja Dirt Bug from the local Canadian tire, I know its a pretty cheap machine but I only bought it for zipping around the pits at the drag races, anyways its has a no-name little 2.8 hp engine and I was wondering if anyone knows if a comet torque-a-verter will work...