turbine

I was saving these wheels for a custom project but have decided to let them go. Front and rear wheels with very light spotting and dirty film on the chrome rings. They clean up well with chrome polish. I cleaned one spot but my arthritis stops me from doing the rest. Some of the fins have nicks...

Old Rupp Front Turbine Wheel. 3.50/4.10-6 Cheng Shin tire with great tread. Could use new bearings and cleanup. $60.00 Delivered. PM Me if interested.

Nice set of turbine wheels. Chrome is very nice. 1 chrome ring has a small spot.Turbines have been cleaned.Has brake drums and sprockets that should clean up easy. $200 shipped.

I have a good but used set of 6" Rupp Turbine (?) wheel set with brakes and drums, #35 chain sprocket and I'll also throw in the axles, new chain to jack shaft and bald slick tires too $75 plus shipping: Front: Rear (some welds on sprocket mounts, sprocket was worn on 1x side so...

Looking for a Rear RUPP Turbine wheel for a Kart! Thanks, FRANK

I just got these a couple days ago. One of the wheels had a lot of pitting on the chrome side. The other has some also but is managable. I went to work on the one with a lot of pitting. I wire wheeled it. Then dremmeled with wire wheel. Then I skim coated the chrome half. I sanded it and...

Hello everyone, I've never attempted to sell anything online before, so I will try to be thorough and honest. :freakout: I have a couple 6" Rupp Turbine wheels with Adran 4.00-6 2-ply nylon tires. The inner-tubes have been previously patched, but hold air without any problems. The tires...

I am in need of some hardware and possibly an NOS or repoped rear sprocket for an econocycle bike View image in gallery View image in gallery I really need: 21 #11511 "sprocket adapter stud" I need at least one but would by more 22 # Correct lock nuts 1/4-20 18...

Working on the cub that I got from Bill1 and trying to decide on which wheels to use. I have 2 different sets of wheels to choose from, and we think both correct depending on what year the bike is (which is still nailed down 100%). I'm actually thinking "down the road" as far as the most...

I think its a 69 Rupp. CAn anyone tell from the frame pics? I also have the original turbine wheels, and 18" seat (I have reupholstered the seat though).

Mine broke and I want to match it up with the front wheel. Here's a pic of the broken one...

Looking for a rupp brake system that is on a turbine wheel or an idea to replace the original brake system. The wheels were on a Bonanaza frame I bought. thanks

A pair of vintage Rupp turbine wheels, front and rear, 6 inch. 70. shipped ***SOLD*** FantomResto@hotmail.com

this is a pair of rupp turbine wheels will or should have the bearings replaced 80.00 shipped

I need a 6" rear turbine wheel for my rupp continental. If it has the sprocket and brake, that would be great. Paul pj_elia@yahoo.com

Turbine Powered US Army Generator and Grandson Matt

Turbine Powered US Army Generator

Turbine Powered US Army Generator

Turbine Powered US Army Generator