212 Predator head gasket source?

[Bikerscum]

The clone gaskets don't fit.... too small in the hole. I'd like to keep it thick... .030+ since I just milled the head .065.

Any sources?

Thanks!

 

[Bikerscum]

=bump=

Nobody? I have a line on .032 copper, I'd like a bit thicker.

No one has had a Predator apart & back together?

 

[sludgeboy]

On the homepage, click on NR Racing link or click here. NR RACING Scroll down to "Gaskets". If you are unsure, call before ordering. I bet they can help you out.

 

[rmm727]

=bump=

Nobody? I have a line on .032 copper, I'd like a bit thicker.

No one has had a Predator apart & back together?

I have. At least the tearing apart part.

4 Cycle Karting Forums - A tale of two clones.

Why don't you get the .042 one from Sneaks. The stock gasket is .050" If you get the .042" one, it'd be like you didn't mill the head and just changed to a .030" gasket.

 

[Bikerscum]

I have. At least the tearing apart part.

4 Cycle Karting Forums - A tale of two clones.

Why don't you get the .042 one from Sneaks. The stock gasket is .050" If you get the .042" one, it'd be like you didn't mill the head and just changed to a .030" gasket.

Because Sneaks doesn't have .042, only .032.... that's where I'm getting them from.

Thanks for the tip tho, much appreciated.

 

[Bikerscum]

On the homepage, click on NR Racing link or click here. NR RACING Scroll down to "Gaskets". If you are unsure, call before ordering. I bet they can help you out.

Been there, done that... nothing listed.

You're right, I should call them.

 

[rmm727]

Because Sneaks doesn't have .042, only .032.... that's where I'm getting them from.

Thanks for the tip tho, much appreciated.

You already know about this thread but he listed .016, .032, .042, & .060 :shrug:

4 Cycle Karting Forums - 212cc predator head gasket

 

[Bikerscum]

You already know about this thread but he listed .016, .032, .042, & .060 :shrug:

4 Cycle Karting Forums - 212cc predator head gasket

Yeah, I know... that's what I thought too. But his email to me said .032 max.