It has been a few months since I last posted. I am working on bringing back to life my 70 Roadster I purchased back in Nov 1970. (actually a Xmas present from my parents). The old bike, ( see pic find and current) has been hiding my my dads shed for 40 plus years. Missing a few parts and of course a hole in the engine block. Learning alot thru this project, but much more learn. A question I have has anyone successfully modified blower housing from the nut-serts to studs. I have most of the internal parts to the engine as well as the lighted flywheel and no blower housing. Last winter I found an old snowblower with a 4 hp Tecumseh in excellent shape. From the things I have read it requires the added clearance which means the studs for mounting the recoil. Any tricks or ideas to convert this blower housing. I don't want to ruin a good part. Thanks dalpan.
Attachments
-
2.3 MB Views: 48
-
3.5 MB Views: 51
-
6.8 MB Views: 39