BC-1000 Swing Arm

[transporter]

I am looking for a complete swing arm assembly to fit a BC-1000 Bonanza Mini bike - currently it is a rigid frame on rear and small shocks in front. If anyone out there has the assembly I am in the market to buy. Will need swing arm jack shafts sprockets and bearings.

 

[ScooterBoy]

I am looking for a complete swing arm assembly to fit a BC-1000 Bonanza Mini bike - currently it is a rigid frame on rear and small shocks in front. If anyone out there has the assembly I am in the market to buy. Will need swing arm jack shafts sprockets and bearings.

Put up a picture of the bike you are working on....

 

[transporter]

Bonanza Parts

Put up a picture of the bike you are working on....

Don't know if my reply made it to you - I live in Beavercreek but work in SE Portland by the Rose Garden. Will take picture tonight and post in the morning.

 

[ScooterBoy]

Don't know if my reply made it to you - I live in Beavercreek but work in SE Portland by the Rose Garden. Will take picture tonight and post in the morning.

I didn't get a reply by PM. I'll wait for the picture and we'll talk later..

 

[george3]

Early and later model Bonanza Shock location is different on the frame. the early Bonanza mounts were lower for a shorter shock. shorter shocks are harder to find.