sprockets

Hey guys so basically I've got a mini bike frame which I'm doing up and everything's going well but I'm having trouble working out the size of the sprocket on the rear wheel it's a 50 tooth but I need to figure out the pitch and what not for getting a clutch it looks bigger than 35 chain so any...

Just curious if anyone is running or has tried a skip tooth sprocket on a mini bike? Supposed to be a low drag option, but wonder if it leads to lost chains... WMS Tuck & Run #35 Split, Skip-Tooth Sprocket | 6435** | BMI Karts and Motorocycle Parts

Ready to order sprockets for the jimmy gote. 13 hp, with jackshaft and torque converter. Be used for trail riding mostly, not really interested in high speed. If it does 35mph I'll be happy. Needs to be able to carry myself and a couple hundred pounds of elk. I was think of a starting gearing...

Looking to buy some junk bonanza sprockets to refurbish. I want to remove and replace with new sprockets so drum should be decent. If you have any style of bonanza sprockets for the gopower, kidney bean or spinner wheels and aren't using them And would sell them for cheap please contact me...

I need a source for a type "C" sprocket with a 3/4'' bore. I can find all I want in a 5/8'' bore. All I can find in a 3/4'' bore are type "B" sprockets. I am sure they are available, I just cant find them... yet. Thanks for the help, Doug Edit; I need a 40/41 sprocket.

I'm looking to buy a jack shaft sprocket, but There is #40A There is #40B Which one is for #40 Chain? And why the distinction of A OR B

If you have used a OldMiniBikes AZ 2151 sprocket or something comparable, were you satisfied with the quality? I have to have whatever brand I get machined, So I don't want to get something that won't last.

I just picked up this manco with brandnew predator 212 installed, has no clutch but the stock rear 72 tooth sprocket is there. What size is this. Do i get a normal clutch or do I go torque convertor either im not sure is this a 420 or 40/41 chain, its bigger than whats on my rupp, which I...

29.99 each - shipped pictures are of both sides, slight signs of use, straight and true payment through paypal, thanks :thumbsup:

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Hola! Como esta? I have two sprocket, hub, brake set ups. One has a 72 tooth sprocket and the other is a 60 tooth sprocket, both for #35 chain. These come with the bolts and spacers. These fit Manco and Lomart/Cheeftah wheels, and probably many others. These are new parts that have been stored...

I know I've seen a thread discussing this? I did a search and can't find it. What are the stock sizes/ part nos for the jackshaft sprockets? Are both 12T sprockets or is the outboard a 13T ( #124 )? The Blackwidow parts diagram lists XL 500 #Item 123 - 12T sprocket /part number 12315 # Item...

Hi, new guy here, been lurking for a few days. Bought a barely used (original gas in the tank) Baja Racer 97cc and after doing gas n oil change, it was underwhelming to say the least. Threw a Predator 212 on it and am very happy with the low end torque. Can ride me and my 4yr old son on...

Pretty sure I need to replace my rear sprocket on my build off bike. Do the split sprockets line up to the standard mounting holes on finned sprockets? Thank you in advance.

I work with a knowledgeable guy. I was told that changing the TC sprocket 1 tooth size is equal to a 4 tooth change on the driven sprocket. Is this correct? If so, experimenting with final drive ratios would be cheaper by buying 12.00 sprockets instead of 30.00ish driven sprockets. What...