Bonanaza BC1000 gx340 powered

[bandit 40]

i have to get an EK chain but i dont know what size to order from EK that is the same as a 35 chains, im on a azusa china chain 8$ ut:

.
Ok your just using regular #35pitch then:thumbsup:, nice job on the mini looks great.........:smile:

 

[spacecoast]

Hey Jake, check Randy's ad out. He is selling 2 sets of forks, not sure if they will work for you or not.
http://www.oldminibikes.com/forum/mini-bike-parts/17398-two-sets-sprung-forks-nice.html

 

[bikerboybenny8]

if thats a bonanza i think u need to straighten the forks

 

[JakeSpec]

.
Ok your just using regular #35pitch then:thumbsup:, nice job on the mini looks great.........:smile:

thanks guys,!

 

[JakeSpec]

Hey Jake, check Randy's ad out. He is selling 2 sets of forks, not sure if they will work for you or not.
http://www.oldminibikes.com/forum/mini-bike-parts/17398-two-sets-sprung-forks-nice.html

thanks for the heads up, but im looking for a fork that is similar and has 2 sleeves welded at bottom not a washer type where the axle slides in

 

[JakeSpec]

http://www.youtube.com/watch?v=AtVFPWY6OvQ
http://www.youtube.com/watch?v=yMg5hkhrIyE

 

[Kenneth]

LOOKS GOOD! maybe a video so we can see it run?

 

[JakeSpec]

My azusalite wheels are finally here, with a 50 tooth sprocket, i lost 20 teeth from the original 70 tooth so this baby will fly passed the 60 foot!

 

[tblumer]

11hp vs composite wheel, I say wheel explodes :thumbsup:

 

[tomsprops]

TB ! What's up ?
Jake this bike looks Awesome ! Pm me I think I have some forks for you that will be perfect ! They could be Bonanza 1100's ? I do know they are Straight as a Arrow ! Just measure your headbolt if they fit there yours ! FREE ! Just come get them ! Here in the SFV ! :thumbsup:

 

[edwin]

i was thinking about puting a 390 in a bonanza but never did. i like how the pegs look.

what up shane, im in the process of putting a 390 in a bonanza right now.
i will post b4, during and after pictures. as the project go's on. and oh hay whats up also tom ?

 

[edwin]

jakespec, nice job that thing hauls pretty good. , now im really inspired to get my 13 horse in my bonanza.

 

[Ghost Rider]

rad build man, you would fit right in to our group of mini fools.

YouTube - Ice Racing Fools.wmv

 

[JakeSpec]

TB ! What's up ?
Jake this bike looks Awesome ! Pm me I think I have some forks for you that will be perfect ! They could be Bonanza 1100's ? I do know they are Straight as a Arrow ! Just measure your headbolt if they fit there yours ! FREE ! Just come get them ! Here in the SFV ! :thumbsup:

hey sounds like a killer deal, ill measure the fork and mounting point today, maybe i can pick up on a saturday!


thanks TOm

 

[JakeSpec]

11hp vs composite wheel, I say wheel explodes :thumbsup:

lol, if i was still on the 70 tooth, i would say yeah, but i dropped down to a 50 tooth and i lost alot of bottom end and the bike takes forever to pick up now, so im thinking something more of 54-56 teeth?

i need helps guys can you helpp me out?

i have a noram clutch its 17T the driveshaft is 17T so its 1 to 1 from the motor to shaft, and on the drive shaft i have a 14T to a rear 50T, it takes a while to pick up but when it does it screams. i tried a 61 tooth and its torqy but looses top end so what should i go next?

remember im on a 50 tooth rear, i need more bottom end, so ....54..54..55?

 

[edwin]

lol, if i was still on the 70 tooth, i would say yeah, but i dropped down to a 50 tooth and i lost alot of bottom end and the bike takes forever to pick up now, so im thinking something more of 54-56 teeth?

i need helps guys can you helpp me out?

i have a noram clutch its 17T the driveshaft is 17T so its 1 to 1 from the motor to shaft, and on the drive shaft i have a 14T to a rear 50T, it takes a while to pick up but when it does it screams. i tried a 61 tooth and its torqy but looses top end so what should i go next?

remember im on a 50 tooth rear, i need more bottom end, so ....54..54..55?

jakespec, you pretty much know the game, i think you just have to find that happy medium between top end and low end depending on the lenght of the track. you know this allready, you want to get the most top end before you hit your limit on your motor right at the end of the course.

im glad you gave me your scenario on your gearing, i just ordered the same clutch, i wanted to set mine up like yours cuz i liked how yours ran on the first vid ,i guess when you broke your sprocket of the wheel. cool vids tho.

 

[JakeSpec]

ok , hell yeah i found the perfect combo, edwin get the 1600 HD clutch with 17T then run a 17T on the outter shaft so the motor ratio is 1 to 1 then the inner shaft sprockket i ran a 14T then the back gear i ran a 55T this thin hauls balls now and still has good torque!, now im done and can finally order a gas tank and powder coat this bitch!, thanks for all the help guys:thumbsup:

 

[JakeSpec]

new 55 T sprocket

 

[edwin]

ok , hell yeah i found the perfect combo, edwin get the 1600 HD clutch with 17T then run a 17T on the outter shaft so the motor ratio is 1 to 1 then the inner shaft sprockket i ran a 14T then the back gear i ran a 55T this thin hauls balls now and still has good torque!, now im done and can finally order a gas tank and powder coat this bitch!, thanks for all the help guys:thumbsup:

sweet, the ratios sound pretty good. im gonna try em, im also gonna try it with 10" rims on my bonanza. but wanted to know what size is the jackshaft, 5/8 or 3/4, and also who cuts your sprockets, Azusa ? thanks

 

[JakeSpec]

sweet, the ratios sound pretty good. im gonna try em, im also gonna try it with 10" rims on my bonanza. but wanted to know what size is the jackshaft, 5/8 or 3/4, and also who cuts your sprockets, Azusa ? thanks

yeah man it works great. im on a 5/8 jack shaft too.also azusa cuts all my sprockets special order, and they get it done quick in a hour or so if they aint busy, talk to tony there he will hook you up
:thumbsup: for azusa eng they are great peeps!