Bonanza Brake

[Hondagx160DB]

Where can I get the rear brake setup for a Bonanza BC1100? I have the zinc plated 72 Tooth sprocket from OldMiniBikes. Its mounted on the left side of the bike. Thanks

 

[truckster52]

This one should work. You will have to add a spacer between it and the bearing and the use a bolt for the rotation stop.

AZ2530 - 5" Brake Assembly | Go Kart & Mini Bike Parts | MFG Supply

 

[Hondagx160DB]

This one should work. You will have to add a spacer between it and the bearing and the use a bolt for the rotation stop.

AZ2530 - 5" Brake Assembly | Go Kart & Mini Bike Parts | MFG Supply

Okay thanks for the reply. Just ordered it:thumbsup:. Do you know how well they work? im using it in addition to a clutch band brake setup on a cruise/drag bike.

 

[prime mover]

I just finished putting a 5" Azusa on mine this week, I was worried about the pull needed on the big spring in it so I used a long aftermarket handle/cable off an old dirt bike, I made this bracket that has double duty, has the pin on it and holds the cable housing. Kinda shabby looking but it works good so far.