Hi All,
I have what I believe to be an early '67 BC1300. I'm puzzled by the steering tube bushings. There is no shoulder and the bottom bushing is threaded (with the normal nut welded on the bottom of the lower steering flange).
Two thick washers take-up the space so the forks fit correctly.
It appears "factory", but I wasn't expecting this. I would like to make it as it was originally.
Any ideas or comments ?
Thanks,
Bill
I have what I believe to be an early '67 BC1300. I'm puzzled by the steering tube bushings. There is no shoulder and the bottom bushing is threaded (with the normal nut welded on the bottom of the lower steering flange).
Two thick washers take-up the space so the forks fit correctly.
It appears "factory", but I wasn't expecting this. I would like to make it as it was originally.
Any ideas or comments ?
Thanks,
Bill