Choke lever bracket for clone

[minibikin']

I have a k&n on my clone. I need the bracket that bolts to the filter adapter to keep the choke lever in place. Anyone?

 

[flpmurphy]

Get it from OldMiniBikes

 

[outdoorguy]

Made one from a 1/2"x 1/8"x4" piece of steel, works great. 1/4" hole in one end slipped over the muffler flange stud on the right side of the muffler, held on with a nut and bent 90 degrees or until it hits the top of the plastic choke lever. That's it. Pic if you need it, but pretty straight forward.
outdoorguy