DB-30 start up

[bruce bruce]

Here's my start up video. Motor is a clone with Tim Isky's Black Mamba kit. Honda flat top piston, ARC rod, 25/27mm valves, ported, Raceseng 1.3 rockers, stainless reverse megaphone exhaust and Mikuni 22mm carb. Thanks to Tim Isky for the parts and excellent service :thumbsup:

Hoodrod start up - YouTube

 

[bruce bruce]

Some pics.

 

[Moedog07]

Cool video, Got any video of it going down the road?

Does it idle down any once warmed up ? Nice welds on the muffler.

 

[Camjamsdad]

Wait till your leg hits that muffler ;-)

 

[bruce bruce]

Cool video, Got any video of it going down the road?

Does it idle down any once warmed up ? Nice welds on the muffler.

Bike's not done yet. Needs the front caliper mount put on and the puke tank mounted. Then off to powder coating. It idles down but I need to put the tach on to set the idle for the clutch stall.

 

[bruce bruce]

Wait till your leg hits that muffler ;-)

I sat on the bike before I made the pipe and can't really see how my leg could hit it during normal riding :thumbsup:

 

[bigkid]

Lookin' nice:thumbsup: Might think about a brace for your header. More pics as you :grind::hammer: please.

 

[bruce bruce]

Lookin' nice:thumbsup: Might think about a brace for your header. More pics as you :grind::hammer: please.

Thanks. Already have the rubber isolater for the pipe. This was just a motor start up video. It's by no means ready to ride.

 

[Square_Chopper]

That pipe is a work of art. Just awesome!! :thumbsup: Can't wait to see the whole bike done.

 

[bruce bruce]

That pipe is a work of art. Just awesome!! :thumbsup: Can't wait to see the whole bike done.

Thank you Sir. A member on here, Bean rocket, did the tig welding. I haven't seen anyone weld better then The Bean Rocket:thumbsup:

 

[bigkid]

That pipe really is a work of art. Kudos to Bean rocket. Have you decided what/where on a fuel tank?

 

[bruce bruce]

That pipe really is a work of art. Kudos to Bean rocket. Have you decided what/where on a fuel tank?

The gas tank goes up front and the catch can in the back.

 

[outlawhotrods317]

How much $ for one of those headers

 

[bruce bruce]

Pic.

 

[bigkid]

Lookin' sweet. Fuel tank and location look good:thumbsup:

 

[vwfan79]

Pic.

What size is that rear tire and where did you get it?

 

[old-timer]

I love the tire set up on that puppy as well as everything else lol.

What size wheel and tires?

Vic