I am about ready to build a drag type frame. I have a idea what I'm going to bend up but would like to see some pictures of frames that guys are running fast on. I have filed several from here to get my initial look from. I have a box stock new GX390 in the mail. This engine will remain stock till I get a roller working correctly. There's nobody in my area doing this so I'm on my own here with this forum. I have joined this site to gather some info from real time experience. The area I have been looking is more argument related than a place to see or gather advice from. I'll do a build thread on this project as it develope's for advice if offered. Anybody got some frame pictures to idea off of. Thanks Walt
Have some frame experience from motorcycle work from years past
So far:
Greyhound 13hp HF engine
1004 torque converter with a 10 tooth sprocket
15.5 diameter rear wheel with a 54 rear sprocket
Live axle...
20' of 7/8ths and 1 inch tubing
1st bike will be more a cruiser to get it right then I'll do another with a built motor...
Again, Thanks for looking and any suggestions appreciated
Have some frame experience from motorcycle work from years past
So far:
Greyhound 13hp HF engine
1004 torque converter with a 10 tooth sprocket
15.5 diameter rear wheel with a 54 rear sprocket
Live axle...
20' of 7/8ths and 1 inch tubing
1st bike will be more a cruiser to get it right then I'll do another with a built motor...
Again, Thanks for looking and any suggestions appreciated
