My question might be pre-mature as I have not even touched it yet but I know you guys have a lot of expertise you share with FNGs like me. Need to take apart front fork in order to install new shock boots I bought from R Kimball years ago. Might as well tidy up all else (e.g., brake unit) that involves that unit while I'm there. How does it all come apart? I see two nut/bold combos on each tube and wonder if pulling those out might free up the lower inner leg (the leg that the axle is mounted on) from the top fork. I also bought front brake parts from Kimball at that time and re-building this bike will now make use of those parts. Thank you for any info you might provide that pertains to servicing the front fork. Side note: haven't touched front end yet but man you ought to see what the rear end is looking like--new paint on frame, cleaned up and painted engine plate, jackshaft unit cleaned up well and new belt going in soon, etc.... And the wife doesn't understand why I've been living in the garage for the last four days!?!