Fuji 100 and 80cc Rebuild

[frankster]

Hi Guys,

Another question, I'm on a roll:laugh:
I need to rebuild a Fuji 100cc motor and it looks like the std piston size for the Fuji 80 engine is 48mm and the std bore for the Fuji 100cc motor is 53mm.
Do these two engines have the same stroke?
Also are the crank, head and cylinder interchangeable?

Thanks
Frankster

PS looks like I need to buy the manual for these engines as well.

 

[Bonanza Bryan]

I believe fuji was made by hodaka or was somehow made exaclty like hodaka. Check this site out and contact the owner Paul he will be able to help you.
Strictly Hodaka