So i have a mini baja and i recently purchased a stage one performance kit. of the kit i have installed a new carb with 0.37 jet and bored out tube, air filter and header pipe. i had to install a new bracket for the throttle return spring and i dont know if i messed something up with the springs or its something to do with the carb. the thing only starts on full choke and when it starts the idle is really high (like she'l take off with no throttle) also its like the idle is "pulsing" quite aggressively as it goes through the revs. When i take it off choke it dies and refuses to start with less then half choke.
Is this the idle screw, Is something off with the gov/ return spring? Any suggestions would be greatly appreciated!
Ive attached some pics.
Is this the idle screw, Is something off with the gov/ return spring? Any suggestions would be greatly appreciated!
Ive attached some pics.
Last edited: