Recent content by Billiam08

Oh sorry I'll make a new one

Hey guys I'm after a deckson daredevil original fuel tank id like to get one but they are extremely difficult to come by, anyone got anything?

Well it was the screw but the problem is that I can see the the whole top part for the Phillips head has snapped off and it rattles out when the engine runs any idea on what I could do as a replacement?

I can get a photo today and maybe you guys might be able to see what's wrong

Hey guys so I'm having an issue with a bike that I'm building basically I've put a 196cc clone engine on and put a larger jet and pod filter on now when I start the engine the the idle is quite high and the throttle sticks even though everything I can see is springing back even the throttle on...

Okay I measured my sprocket with calipers and the thickness is .184 and I don't see that number on the chart above so I'm feeling a bit lost

Hey guys so basically I've got a mini bike frame which I'm doing up and everything's going well but I'm having trouble working out the size of the sprocket on the rear wheel it's a 50 tooth but I need to figure out the pitch and what not for getting a clutch it looks bigger than 35 chain so any...

Hey all im currently in the process of putting together a Deckson Daredevil mini bike and the current handlebars are stuffed as the previous owner had welded them directly to the forks I was wondering if anyone in Australia or possibly New Zealand would have any old forks that suit these bikes...

I appreciate all the help thanks

So run a sprocket straight from the engine shaft leading to a jackshaft with a larger sprocket and on the other end a centrifugal clutch?

So if I need a jack shaft what tooth sprocket for the front and the rear ones on the jack shaft need to be?

My engine is very small only 1.6HP and 39cc I believe I realize this is a very low HP for a bike but I really want to make this work what kind of work would a sleeve take,thats the one that sounds like what im looking for.Would it have to be shop made or would I be able to make it myself.

Hey people so basically I have a tiny little 2 stroke Fox Motori Engine and it has a 12mm keyed shaft I was wondering if I would be able to put a normal centrifugal clutch on it as I have seen people put a centrifugal clutch on the little Ohlsson And Rice engines so is it possible to put a...

Okay what do you mean by high/low? I dont quite understand.

Hi all,I have a few questions about the 90cc engine on a Honda CT90. What is the HP on this engine, will it be suitable for a mini bike? Thanks