alternative

I bought these while trying to find something comparable to replace the original failing fork boots on a Fox campus I am in the process of rebuilding, far from a dead on match but not a bad look to them and they are built well and should be doable. I stumbled into an NOS set of boots and some...

Seeing the thread for the China diesel got me wondering. I remember an article on building a steam powered mini back around 1970. what else is there? propane? electric? or....?

I am looking for an alternative for the front fork springs on my Bonanza. The stock springs are a little light for me (I like food and beer:thumbsup:). Does anyone know of any spring alternatives that are a little stiffer?

Is there any alternative flywheels for the h60? Can a flywheel from something else fit if the taper is recut? I'm looking for something lighter.

Cut up some rubber material to keep the mud off my twisters jackshaft and engine. Still need to make a heat shield for the exhaust. Should be a light weight, easy and inexpensive solution for a missing fender-

1.)I can only assume that I am not the only one who experiences this , I was slightly ashamed that the seat that came with the mini bike wasn't spring loaded or had any suspension on the seat itself and it kills the lower back. I was curious to know whether there is a aftermarket spring loaded...

So I have an old Tin Lizzie that I bought from a Shriner about 15 years ago and I'm wanting to restore for my kids. Problem is the rims are fiberglass and have all busted. I know I can get some new from sharp mini cars in Kansas but they are hard to get a hold. I found these MINI MODEL T...

I've got 2-hp Briggs (dated 1972) I have all apart and cleaned and am preparing to put back together and was wondering if there's a better carburetor that could be substituted for the one that screws onto the gas tank? Just wondering if anyone has done anything/found anything better...

Does anyone know an alternative spark play that can be used with the stock 2.8hp engine? I believe a hotter plug could help perfermorance a bit. The stocker seems to foul easily. Thanks

I need 2 pair of fork boots for two Bonanzas I'm working on and just can't justify spending nearly $100 for the reproduction ones being sold...There has to be some mountain bike or other small bike that has boots simular in size but I haven't found any yet....I'm not concerned about keeping the...

For Serious RPMs.............Take a look at this !!!! YouTube - KM48 Mowerbike http://www.youtube.com/watch?v=wJZML6OUDv8