brass

I have a eBay tav2 knockoff. I recently noticed that the brass spacer on the drive clutch was broken in half which resulted in my belt turning inside out... When I initially put it on it seemed a little shorter than I thought it should be but I went with it.:hang::hang::hang: I have since...

Is it possible and what is the best way to go about it? I have a solid rim with a tubless tire that always leaks a little at the bead and cant see or feel any reason for the leak and if I dont keep an eye on it it deflates and I loose the bead seal! Ratchet strap trick has not worked for me even...

3/4 bore New in Box, Stamped Jun 16 1971 :blink: Only thing, the Brass belt bushing is missing. 10.00 at gokartsupply.com 120.00 plus shipping

only $800 lmao and the brass horn exhaust is really rare... :laugh: mini bike

Pick up this mikuni carb that i want to run a clone engine,but i am not sure what type i have. I thought it just had the small brass hex main jets. After taking the bowl off i notes it has a large style jet with tube and o-ring. What type is this and where can i find that type of jet. Right now...

Can't figure this one out. It was on craigslist. Disc brake has brass pads...? Thanks in advance for you help.

This is the bushing that goes between the driver halves and the belt floats on it at idle I assume.

Just like it says i checked the hardware store and they didnt have the right size, i am looking for 2 brass inserts that go in the steering neck i know they are 5/8 inside diameter and i am not sure of the outside diameter? No rush on them, but if anyone has some that will work let me know! i...