db-30

I recently disassembled the front end of my DB-30 the other day for a general inspection & to insure that all was well. I found that the top bearing would not turn freely as it should. I was also surprised to see that the bearings were not water proof. The original bearings carry the part #...

I've been slowwwlllyyy working on a DB-30 + B&S engine swap. While I was digging through some of my various odds & ends, I ran across a set of foot pegs that I had laying around.

If we remember back a few moths ago A member posted up this bike , I wanted to build my own version ,, Here is His

new seat from a DB-30 $20 + shipping all boxed up ready to go

I have some left over parts for sale. All parts are brand new, never been used. 3 145/70/6 knobby tires $15 each DB-30 seat $20 fenders red and green $10 each or $15 for a pair chain guard red and green $5 each 4 front wheels with bearings (no tire) $10 each 1 plastic clutch guard for...

Looking for pics & advise on the design & construction of a new chain-guard. Also interested in how most of you are adjusting & controlling the excess chain length? Thanks ~JM~

I have engine kit parts for sale, all the parts needed to install the larger 6.5hp engine. These parts are designed to work with Baja Motorsports DB-30 mini bikes with 4 slots in the frame engine mounting plate and a 6.5hp Honda/clone/Harbor freight engine You supply the 6.5hp...

I need 6.5 engine adapter plate for baja db-30 nautiqueman

Hey All, I was looking at Doodlebug DB-30 prices(regular price) at a couple of places. I see Harbor Freight sells the DB for 329.00 & Rural King(like Tractor Supply) sells the DB for 299.00.I was trying to get a list of stores that sell the DB,so I could get the best deal. I emailed Baja...

And where did you find it? :out: Thanks ~JM~

Hi, My name is Jason, and I seem to find myself in periods of unemployment every once in a while, which is when the crazy projects seem to get started. I've had the desire to build a mini bike for many years, theres a frame or two in the yard, and a few pieces here and there, but other...

Has anyone made any efforts at trying to keep the original 2.8 engine for a beginning rider in the 110lbs. range? I have been toying with the idea of swapping a Tillotson carb or a 14mm Mikuni type carb plus a pipe onto the engine to see how that will do. A 6.5 swap would be a bit too...

hey, dose anyone know how to remove the engine mounting bolts of the DB-30? If so how did you do it? Did you have to use a power wrench or what? and what size are the bots? thanks

What size sprocket should I put on the back for really good acceleration? Also how much of a power gain will I get with straight pipes? Thanks, James

hey, Dose anyone know were I can buy a new tires for the DB-30? I dont wont to buy them off of baja site because there pretty pricey and I dont wont to pay shipping. Thanks

Hey i lost the seat bolts for my stock db-30. Dose anyone know were to get some new replacement bolts at a fair price?? If not dose anyone know what size the bolts are. Head up if you take you seat off for some reason like i did make sure you put the bolts back on tight. I hand screwed them in...

I have another Baja Motorsports DB-30 for sale with a 6.5hp engine. The bike, engine, clutch is new. The bike has never been run yet, never had gas or oil in it. The bike is 100% new and ready to run. This bike has plenty of power to haul heavier riders. For sale in SE Michigan, I have it...

Is it just mine or dose everyones stock chain rattle on the stock motor. I have adjusted the chain adjuster thing all the way and it still lose. Is the idle speed to high?? What about the chain is to long can anyone tell me??

Hello, I'm new in here and would like to know how to get in contact with cjtmini for purchasing a 6.5 hp motor for my mini. Thanks

Hey all i am new to this. I am just wondering if there is any stock upgrades for the stock engine on the db-30. Like air filters and other things. Thanks for you help :scooter:http://www.oldminibikes.com/forum/images/smilies/scooter.gif