governor

Hello All. I'm a new guy on the forum and new to small engines. I have a predator 212cc motor and comet torque converter. I just got my order: header/muffler, jet kit, high flow air filter kit, valve cover filter, and choke cable retainer clip. I found this throttle cable bracket online. I was...

Briggs 3hp. 5/8" crank. Air vane governor. New diaphragm in the carb and intake gasket. Tiller carb, so governor bypass will be very easy with go kart throttle bracket and return arm on carb. Runs well. Complete engine. $80 shipped from Grandville michigan. PayPal or $65 pick up locally. I can...

Nothing fancy, azusa hornet frame and a predator 212 engine. havent decided what color to paint it yet. Got it pretty much all put together last night and took it for a spin. top speed isnt to high with the governor, but it gets to it fast. almost flipped it over first time a gave it some gas...

Hi guys. Just yesterday I swapped a 6.5 hp Champion engine onto my Fox. I'm having one problem though: as soon as I start it it revs to the moon. If you hold the governor linkage back, it idles fine. The governor doesn't want to return the motor to idle. I tried adjusting the governor by...

Hello, I found this forum while looking for info online. Any help would be appreciated. First it is a model 111232 0035-01. I had it running sitting on my drill press. I just found a sweet spot for the throttle and held it by hand. Now that I have put the governor spring on it, it won't run on...

I cut the flap iff of my governor arm so when i put it in the block and put the cotter pin on it, the peice could fly out. Idk how i could secure it in both ways maybe cutting 2 grooves on the inside so a clip could go over it? By the way i finished my engine besides this dumb problem...

Iv been told a few things so I thought I'd ask on here before I go ahead and do it. I finally got around to swapping all my parts over to my new block rod piston flywheel all the goodies. I was gonna put a bolt and Teflon nut to plug the hole from were I removed the governor but I've been...

Hi all, new member here. About 2 months ago I got a Baja Warrior from a local Tractor Supply Co to have some backyard fun! I loved the riding style/feel of the Warrior and it did very well in the backyard "tracks" I have tried so far. The stock engine (Honda GX200 clone) almost always started...

I need a throttle plate that bolts on the cover and all linkages including the governor linkages. This stuff will be mounted on a Tec H70. Not sure if they are specific, This is all that Im missing to get my minibike going. Thanks

I have a Baja mb200 that's been fairly well maintained with a gtc torque converter conversion. other than that it is completely stock. I was working on it a few days ago, just tinkering, and a screw had fallen down underneath what I think is the governor rod. in the process of retrieving it with...

Hi everyone. Its been a long time since I've been on the site. I just started working on my drag bike project again.. Its been over a year since I've touched it. I have the engine mounted but I have no governor linkages for it. Its a old Craftsman engine that I found out is a H70. Does anyone...

I purchased this hoping it would simplify adding a throttle cable to a new predator engine. Boy was I wrong. Engine Top Plate for Predator 212cc: Go Kart Parts: Racing Karts: Engines: Frames: Tires: Tips: Kits: Torque First of all the bolts that hold the whole thing onto the engine are...

I have a couple of old Briggs engines I am trying to use on a couple of minibikes. They were torn down when I obtained them, and as I have them back together, I can't figure out how to hook up the governor spring (where to connect it), and how to rig the throttle cable to the throttle control...

My vintage Tec has a Governor rod that is worn. When I disassembled there is a clip. see pics. Couple questions.. 1. How does one remove this clip so it can be re-used? 2. Serial number and OldMiniBikes replacement rod doesn't even show in diagram or have notched area for one to exist. Did they...

Hello there guys! New to mini bikes and am in need of some help. Bike: Manco Tbird 3.5 tecumseh After creeping on here for awhile i think all im missing is the linkage(part #37735?) to connect the governor to the throttle valve. So without that part the governor arm stays pulled towards the...

briggs & stratton 5hp throttle linkage governor setup carburetor stock 4

briggs & stratton 5hp throttle linkage governor setup carburetor stock 3

briggs & stratton 5hp throttle linkage governor setup carburetor stock 2

briggs & stratton 5hp throttle linkage governor setup carburetor stock

Hi, newbie here! I got this briggs and strat engine that had been sitting for 2 years, brought it back to life then broke it down to convert it to horizontal drive. I have the original tank and governor but I see people use metal ones on mini bikes, could anyone point me in the right direction...