hh60

So I picked up a Tecumseh Motor Sport OHV engine (silver) and was told it was a 4 HP but i'm thinking with the Model HH60 everything I see point to a 6hp. Right?

Hello all new to this forum, don't have any mini bikes but I am in desperate need of a techy expert. I am rebuilding an hh60 engine for my latest Wheel Horse tractor restore and need a new flywheel but every flywheel I find has too small of a taper for my crank. This particular engine has...

Hey all, My neighbor says he'll sell me two early 60's model HH60 engines for $50. That's for both and they're running fine he claims. I don't have a pic of them yet but I do know they have 1" cranks on both, which will blow a gaping hole in my funds when the time comes to buy a clutch. Are...

i have a complete tecumseh hh60 for parts tell me what you need every thing is there. Make me a offer on the stuff you want ill take a trade just let me know what you have my pictures for it are on this www.oldminibikes.com/forum/tecumseh-engines/70274-tecumseh-hh60.html ill take some on here as...

i found this Tecumseh hh60 in a shed about 2 mounths ago the house it was at had been aboned scince 2006 my friends no the people who bought it right after the man died in the house and the stuff has been sitting there scince the guy who owns it doesnt want any thing in the house so i was able...

Hello, I have a Tecumseh HH60 which came off a Troy Bilt tiller. Its on a log splitter now. Recently it started spitting oil from of the carburetor when it gets hot and it also puffs blue smoke once in a while. I replaced the rings but this hasn't resolved the problem. Any ideas? Thanks, JV

Wat is the difference?

I came across a cool old Tecumseh HH60 with a cast iron block (not cylinder liner, complete block) and a ball bearing 3/4" PTO. It's mounted on an old tiller. It's not mine and I'm not selling it but if anybody really wanted it I could buy it and ship it to you. PM me if you're interested.

hey guys not much of a tecumseh guy, but i have this carb off a rototiller that hasnt been used in quite some time dad never drained gas out so i drained the bowl cleaned out carb with air compressor and carb and choke cleaner. when i put the bowl back on and attached the gas line the bowl...

Please PM me if you need some parts. Most part are $10 to $15 Plus shipping. Crank shaft, camshaft, block, side cover, head for 3.5HP B&S Crank shaft, camshaft, head, gas tank, carb, coil for 5HP B&S Crank shaft, camshaft, iron block and side cover, head,gas tank, starter for...

is the only difference electric start Vs. Manual start? can you make a H60 manual start into an electric start?

Hi...have a mid 70's HH60 which had a broken rod. Actually located one of the NOS rods for this engine in California. ( man was this hard to find) There are NO markings on the piston...so Im guessing it does not matter which way it faces going in. Also the broken rod looks to be one with a...

I am just getting into small engines, I have tinkered around with them before but nothing big. I have aquirred a Tec HH60 that has been sitting for about the last 10-15 years. I have taken it apart and it looks surprisingly good inside, but I want to do some work to it while it's down. My...