lighting

Looking for a lighting coil for an H70 points engine. Anyone know the part #? Can the same coil be used on other engines, like HS50/40 or H60/50 etc…

I have a 69' Trail Tramp and I cant for the life of me figure out how the brake light works. It seems very simple but it doesn't make sense to me. Also, if there are any lighting wiring schematics out there, that would be helpful with my headlight wiring as well. Thanks!!

Did Briggs ever use a lighting coil on an engine ?

I was asked in a headlight thread to do a DIY on LED lighting so I will pass on what I have done to add led lighting to my minibikes. I will cover the following, Advantages, Converting a period correct sealed beam to LED bulb, Led lighting for headlamps with replaceable bulbs, different types...

Hello: I am still gathering parts for my 1969 Bonanza 1400T project and I am now looking out for an engine. Must be a vintage Tecumseh H50 5hp with a lighting coil. Motor should be in great shape, no issues. Does not have to be date specific to the bike. 60's or 70's vintage fine, just not...

I have an Aspera HT35 from the 1960's/1970's which for all intents and purposes is the same as an H35. I recently got an H35 lighting coil from an OldMiniBikes member and the flywheel rubs against the coil. Question is: are the flywheels on the lighted H35 engines different than the flywheels on the...

Trying to wire up the lights on my trail horse which is a first for me. Tail light has a brown and red wire headlight has 2 whites. My engine has the standard plug with the red black and green. I was planning on running The brown from the tail light , one white from the headlight and one wire...

Hi guys, does anyone know if an HS40 lighting coil will fit/work on an H35? Thanks.

Just picked up a lighted h50. What does it put out 12v or 6v. What to buy a headlight and not sure about voltage. Thanks.

I have been researching lighting coils for my 420cc Predator. I have read and been told that the GX390 stuff will fit. Can I get a little advice on out put. There is a 3 amp, a 10 amp and an 18 amp output setup. I figure the 10 amp will keep the battery charged and the lights on. Anybody...

i have a vintage 6 hp tecumseh h60 motor with lighting coil. perfect for your vintage mini bike project. 675$ buyer pays shipping I'm in northern california. i take paypal.

Anybody have a Tecumseh Flywheel for a lighting H25? Part # 32338. Thanks

Found this maintenance advisory in my Clinton Master Parts manual for testing lighting coils. I'm sure its applicable to Tecumseh's. By the way, what ever happened to all the Clinton Lighting Coils? Like baby pigeons, you just dont see em. Why?

Hey, does anyone know if its possible to install the lighting sub assembly from a mb200 on a predator (non-hemi)? this includes the flywheel and the coil packs. If they don't fit do you have any idea what will?

I am looking for a link or info on where to get a reasonably priced new clone style or predator motor with a large enough system to power an old headlight and maybe a tail light. Under $200 would be ideal but.... I would prefer something new and ready to go. I am having a hard time wanting...

Wire needs to be repaired. $80 plus shipping or can bring to windber. If you want the shroud you can have it.

Will a HS 40 lighting coil and flywheel work on a H 35 ?

Will the lighting coil and flywheel from a HS 40 work on a HS 50 ?