maker

The Widow Maker is ready for new ownership. This modified MTD Trailflite sports an early Central Machinery (HF) 6.5 Clone that has upgraded power via Header and re-jetted Carb and Cone Filter. Governor spring has a small zip tie added to increase rpm. Has had back tire replaced, Tach added and...

I picked this up today and wondered what it is? Very sturdily made and runs good. It has a foot brake as well. There is a fancy door bell shut off switch too. Gary M

Hi, i have a sachs 80b motor, i have been told i cant run lites from it because it has no charging system.?? however it does have a hot wire from the motor.( its a heavy yellow wire) i tested it and it show at least 14v and does lite the head lite very well. any thought on this ? will i burn...

newly acquired widow maker project

does any one know what the correct gas ratio is for the 80b engine? for a speedway widow maker. i have heard 16:1, and 32:1, i saw on a widow maker gas tank (caution 16:1 mix ratio) seems kinda rich.

I am selling my 1972 speedway widow maker. The bike needs a restore but all of the pieces are there. The motor has great compression and i has a good pull start that is rare for a sachs 80b. I will post pics on saturday because i am currently out of town. I can deliver to windber for free if...

Is there a seat maker on OldMiniBikes?

If anybody is in the Detroit area the Maker Fair is at The Henry Ford, some pretty cool stuff

I picked up this Go-kart last night with one Puch mopehead, two Honda 50cc scooter things and one Indian / Fuji 100cc trail bike (pictured in other forum here on OldMiniBikes). Can anyone tell is this a known make ? Looks like it will be simple for me to bring bake to life. Thanks !:smile:

I guess this isn't a Taco, So what model is it ? And what year is it made ? Thanks Motorbike1956 .[url='http://www.oldminibikes.com/forum/photopost/data/500/image1822.jpg'][img]http://www.oldminibikes.com/forum/photopost/data/500/thumbs/image18

:shrug: Picked this up in December as a winter project...

I need to get one of these! Imagine the clutch covers you could make. :thumbsup: Ford's Advanced Prototyping, Personalization and Low-Volume Production Technology - YouTube

Tank is clean few marks on it $100 plus shipping

I have a NOS chrome header pipe for the Speedway Widow Maker. 35.00 plus shipping. NOS Air cleaner for same bike 15.00 plus shipping

Someone painted the frame red but it is a Widow Maker. Speedway Minibike | eBay

I am looking for parts for a Sachs 80B: Pull Starter Assembly Torque converter (engine) Adapter for Sachs shaft to std. torque converter Any exhaust pipe pieces. Coil and wiring. So, basically I have a motor and a rolling bike and need the rest. Thanks.

Here she is, what is it? Looks like it had a jackshaft at birth. Frame is in very good condition with what appears to be orig. paint. Thanks, Keith

would this be good to use to seal intake and exhaust! should I also sue a paper type gasket between? any feed back would be great. this is for a methanol jr dragster engine. Ultra Black® RTV Gasket Maker | Princess Auto

Thought some would enjoy seeing what a master knife smith can do. The knife shown has a Damascus blade that he forged in the next room. Every part, including the scabbard, is made by him. He lives nearby...occasionally I do nickel plating for him in my basement because he does not like...