out.

  1. H

    HS50 recoil pawl keeps falling out. Any easy fix's?

    I can only get two or three pulls on the recoil before the pawl falls out. the spring is there and the top plate is there but the pawl keeps slipping it. is there any easy fix fot this? do i need to buy a new entire recoil assy? that would suck.
  2. kbs8ball

    MINIBIKESEATS.COM go check it out.

    Well Ive been thinking of having a website for years. I dont know if its going to stay up or not. go check it out and tell me if i should keep it. Thanks guys minibikeseats.com
  3. Bonanza Bryan

    Check This Vid Out.

    http://www.avweb.com/avwebflash/exclusivevids/ExclusiveVideo_SupersonicFlight_202736-1.html
  4. R

    New Guy, just trying to figure everything out.

    Hope I am in right thread. Just started with a minibike for kids Now I think they are for me. Started with a Baja mini and just happened to find a 1970 S. E. Woods locally. Not running yet but in decent shape. Might try to find more if possible. Hi to everyone. Not sure I should belong to a...
  5. Evilution

    Not mine. Keeping an eye out.

    Thanks to mmrb for pointing me to the right spot to post this. vintage mini bike with 4 hp motor Good deal?
  6. K

    have shaken the world and nothing fell out.

    :out: need rear shocks and front fork assembly info for "98 Aggie" mini
  7. maddcarson

    Honda dying out.

    My honda is having problems now. It runs fine at idle. When i give it a good amount of gas it dies out. all the gaskets are new and sealed. I think its has to do with the carb because everything else is working fine. If its is the mixture and i have to tweak that, Can someone tell me where...
  8. 70chevrolet

    Ricky Martin Comes out.

    Wow.. Out of the Blue... Blindsided. Now who would've ever seen that coming? :doah: Menudo-4-Life!
  9. minibikes4life

    lmao, check this out.

    http://www.youtube.com/watch?v=cM2SWNCes5g it's so tempting:lol:
  10. S

    check this home made out.

    little 5hp briggs home made! YouTube - janandscott's Channel
  11. edwin

    briggs intek coil. cutting out.

    a buddy of mine had bought new intek 6.5. we milled the head, advanced the timing, threw on a mikuni. yanked the govenor. at about my guess is 5000 rpm it feels like the coil cuts out, when the rpm drops its on again. are those coils not capable of higher, rpm's ? has anyone expierenced the...
  12. B

    Need help with carb flooding out.

    Have a Tecumsah 5hp and the carb kept flooding out with gas pouring out of the carb. So I rebuilt it and still had the same problem so I lowered the float level and added a fuel filter and still does it. Any ideas? Maybe a hole in the brass float? If someone has a carb, I'd be interested in it.
Top