pattern

So i should've measured before ordering...but my Wards Buffalo has a 2.5" Tri bolt pattern for its brake drum. Where can I find this pattern on a brake drum?

anyone know the exact bolt pattern of the 4 bolts surrounding the PTO? in this picture from agk.. I'm going to build a clutch cover since changing to a greased lightning. It scares me...

Can anyone tell me what the correct bolt pattern is for a MB165 / Warrior. I need to source a 60 tooth 41/420 sprocket. Thanks in advance. NOS

of does anyone know the gear pattern on this bike. I was told in neutral you go down for 1st, up for 2nd and down for 3rd and 4th. any clues. :hammer:

How many bolt pattern sizes are there for the standard 2.5,5,10hp engines? Would a HF 6.5 clone share the same bolt pattern as the 2.8 in a Baja dirt bug and be a relatively easy swap?

I did a search...and I know the hole pattern is the same as most other engines. My problem is I'm at work and want to cut down and drill out a piece of 1"x1" boxed aluminum to act as an engine riser. I don't have an engine in front of me that I can measure, but was hoping I could get this...

I have the incorrect tab mount for the seat. I'm looking for bolt spacing and how far apart the mounts are from each other. A picture wouldn't hurt either. :biggrin:

Anybody know the mounting pattern for a H70? Thanks, Mike

I have a old 6S briggs I would like to swap out of my sons go kart to a engine with more hp. Someone told me the mounting patterns on the engines are all the same and I could drop a new briggs right in. Is that true?

Can someone please help me out with the seat bolt pattern on a trailhorse. Thanks

how big is the mounting pattern for the GX390? i want to put one on the new frame i got but i don't think the plate is going to be wide enough and i don't want to move it to the rear of the frame. i'm thinking i should just build a mean GX200 for it instead since i can make plenty of power...

My friend needs a front rim for his Bonanza project. It is 8" 3 bolt pattern. Ann Arbor area. Can pay for shipping! Thanks...Craig 810 459 2590

Is there any other engines i could put in my DB without drilling new holes or creating a mounting plate? or is the DB a wierd bolt pattern that is unique to that engine only?

I need a definition of this as it applies to a 5/16 bolt hole sprocket. Is this a 4 on 2 13/16th circle or a 4 on 7/8" circle. The information on the internet is confusing in this regard? Also is is this pattern 2 inch center bore? Tom

i've got a Honda GX120 that i want to stick in my DB30 for now. do the mounts on it match the ones on the 6.5 clone? i want to get the plate from cjtmini for now if they're the same. i keep everything mini bike related at my friend's house (i hate living in a small ass apartment) and can't...