Hi all, new to the forum. I picked up a beat up 71 Kawasaki MT1 A which I suspect may have a later model case cover on it. The cover says 1 down, 2 up, but my bike seems to be more like a Z50. Neutral all the way up and 3 down. Is this correct? There is a false neutral between 2 and 3 so when I...
I have a 250X that I am trying to piece back together. I need a chain guard and would buy a reasonable priced one if someone has one for sale. Otherwise I am going to just make my own. If someone has a 250X and would be kind enough to trace the shape of the face for a pattern and tell me how...
I'm looking for a rear sprocket in 72 or 60 tooth with a 5" internal drum with 6x3 1/4" hole pattern straight across. All I can find is 4 1/2 drum and the wrong bolt pattern.
I'm looking for a Briggs side cover for a mid 60's 4hp Briggs. I believe a 5hp cover will work too. I need the one with the 4 bolt holes in the square pattern around the shaft to mount a taco clutch guard. Thanks, Chad
Hello, I just purchased a repo 69 cover. Can anyone provide an actual size template of the slots from a metal one? I want to have the slots machined in the glass repo.
Any help would be appreciated.
Thanks,
joe
Alright so I bought black 10 inch rims from ombw thinking the bolt pattern would be the same as the chrome 10 inch rims, turns out they're not the same, anyone have a way of making a pattern or something of that nature to save me the hassle of shipping them back?? Anyone have any tips On how to...
I was looking at the sprockets at OldMiniBikes for the cat but it doesn't say dimensions. Anyone know if this will work on my cat 250?
#35 Chain - 68 Tooth Sprocket for Cat Mini Bikes with Disc Brakes
I'm almost sure the spacing on bolt pattern is 1 and 7/8"
Any help would be greatly...
I found these on eBay. They are listed as a set. The one looks different to the other. Is that bc it needs a sprocket mounted to it. The pattern is deffinently different. I sent the seller a message and he assured me they are the same. Any help?
Did this for an OldMiniBikes member. He had an original that I used for a pattern.
The first picture is of the original on the left and my new one on the right. The second and third are the new seat.
NOS never mounted or used Knobby/trials pattern Cheng Shin tires. I have 2 of these, Cat used these usually on the rear, offhand I dont know who else used them. They are basically the same as 14x6 Rupp trials and even the 4.00x6 knobby's that Carlisle offered in size and tread pattern...
I have one now, but the throttle shaft has way too much play in it!
I need the older version from the late 60's with the small bolt pattern, and the smaller tank to carb gasket...if that make sense. I already have the deep tank for it. Let me know what you have!
Does anybody know...is the 4 bolt pattern for a Tecumseh and Briggs EXACTLYthe same...?
Talking like an early 70's Tec 5hp vs a Briggs 5HP.
Are small block and big block all the same ?
.
I have two Bonanza BC Series MINI Bike builds going on right now. I am going to build both of these bikes stock: wheels, fenders everything but the following items. Both bikes are going to have a custom two color paint job with the handle bar and remote fuel tanks white and the frame and pegs...
Does anyone know the exact bolt pattern for the Arctic Cat 6" wheels? Im specifically wondering about the 3 bolts that hold the brake drum on. Thanks in advance!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.