peerless

Looking for Parts or the whole assembly from peerless. Current axle from around '92-'93? Any condition welcome. Any info would be great.. part number is peerless 100-068 1175 3747

I have a project I am working on that will be useing a peerless axle , that I bought from Gumpit a few years back My question is , do I need to support it with 4 bearings ( 2 per side ) or is the differential strong enough to only use 2 bearing mounted spaced out close to the wheel hubs...

as stated in the heading, looking for a 60 tooth sprocket 41 pitch.... also looking for a brake rotor to fit a peerless diff..

looking for a peerless or holton diff in good shape with 1" axles....

Hey guys, I just started working on a project I haven't touched in two years, and I thought a few of you might appreciate it, so here it is: I bent up some 1.5" pipe and welded everything together to make the main frame, then I used some 1" to attach the spindles. I still have quite a bit of...

At least that's what I think it is.....I'm 99.9% sure this drum is made to bolt up to the Peerless differentials. I bought this setup years ago from Yellowhand when I was building my trike. The drum is vintage NOS , quality made, heavy duty....measures approx 4-1/4". Bolts onto the existing...

i was talking to a member after mentioning that i could get a hold of some small lawnmower differential axles that would be perfect for making asphalt mini trikes. the problem with a solid axle on a mini trike is the inablilty to steer. offroad is fine, you can slip the tires in the dirt, but...

First of all I would like to thank all of you who have given me a ton of good info on my project. I have a 1974 Alsport TS110 built by Promark. I am looking for any information on a replacement rear sprocket that bolts to the Peerless 133B axle. Are these sprockets available or is this...

3/4" Peerless differential with 40 tooth #40 sprocket. 24" overall length 10" and 14" to center. no keyways the long side has a hole. insides have been checked out and are in good shape. $50. shipped

looking to make our snowbike posi.is there a way to lock the diff?

ok trike guys.i need a source for different sprocket sizes for a peerless diff. i looked on the net with no luck.

A snap ring came off the end of one of my axles on my Peerless model 641 rear end on my garden tractor so I have to take it apart to put it back on. I have it partially apart but I'm can't seem to get the 2nd half off the case off. Does anybody know what I should do? or know where I could see...

Just got this in the mail today along with a standard Tecumseh one. They are bigger than I thought they were. I barely have room to hang one let alone the 2 so if anyone wants it $18 shipped its about 24x40" made of silk, one sided in good shape coulpe of spots, tassles and rope in nice shape.

im trying to build a small offroad buggy with a 15hp briggs engine. I was looking into using a peerless 700 transmission maybe with a custom case and bearings and fill it all with oil. one thing im wondering about is can the peerless transmission be shifted on the fly? lets say i put a manual...

If anyone is interested, Northern has 60t sprockets that fit the 100 series Peerless differentials. They are almost $60 at Outdoordistributors and $64 at Partstree.com and thats before shipping. Northern was less then $40 to my door. Drive Sprocket — 60 Tooth | Chains, Sprockets + Hubs |...

A friend of mine has a pallet of NOS 'Peerless' kart differentials... I believe they're 1" axles, about 36" width, but I haven't actually measured them... There is a tag on the differential with a part number... If anyone is interested in one (or more), I can find out exactly what the...

First diff is 34" long with a center diff. it seems pretty tight and very useable, one side the keyway for the wheel is pretty buggerd up. no sprocket. 60$ shipped The second diff is 24" long its pretty beat. The stays for the spider gear pin are pretty beat up from running without all the...

just bought a snoco nomad for 30 bucks and found the 100 series peerless diff had exploded the housing. does anyone know where to find a new housing and parts or a new diff all together thats not ganna cost me an arm. the tag on the side says mod175 peerless 4148 0646 thanks