stud

Guys i need your help. I have a tillitson 212 hemi i bought early this summer. I dont frequently change exhausts and i didnt over torque the nuts on the studs. I use a torque wrench. i went to remove the header and put on the stock muffler for noise reasons. So i tightened it up, and I felt it...

Should be able to put it in an envelope and mail it. I pay via PayPal. Or American Express if i can figure it out. $3. If i could get 2 for $3.50 that'd be nice.

I'm restoring an HS40 for a Rupp mini bike. One of the 4 studs in the blower housing for the recoil starter is stripped beyond repair. The studs look like they are pressed into the blower housing from the inside. (Hopefully they are not welded in!) I'm wondering if I can press out the bad one...

I purchased a mini bike that has a 5hp Briggs motor (not sure which model) It runs good but leaks gas, i replaced the gasket between the tank and carb but it still leaks. After looking closer i see that the air filter carb stud goes thru the carb and into the gas tank. There isnt any gasket on...

Guys I need help. Where in the world do I find header stud bolts for a predator 212 engine!

I'm putting together a high compression motor and am going to get automotive grade bolts for the head and side cover but I'm wondering why people say studs are better then bolts.

You're looking at the tough to find, vintage 4.10/3.50-5" Goodyear stud tire. The side walls are in great shape, no cracking. The tread has some wear, and there is one spot where the side edge of the tread has a blem or damage or whatever (see pic). I was going to use it on my Dart but a...

Anyone know size of head studs for 6.5 clone?

Snapped a front mounting stud and tried to drill a hole in the stud so i could take it out whit a counter thread thinggy. Got a shiftkit in it so taking engine off was pain in the:asshole: so tried to drill it in the frame and this is how it looks now:censure:. Any suggestions how to fix it?

OldMiniBikes warehouse is shipping my air filter kit without the carb stud because they are out of them. I was told I could use the stock stud just back it out a little..is this true?

Like it says no one local by has a 2 1/2 inch Brake band with stud please send me condition and price pic if used:thumbsup::thumbsup:

Where to get one... Anyone? Thanks...

If I use head studs to mount a honda head to a predator I won't have to use dowel pins? Thanks doug.

Hey Fellas, I'm looking for some tires for a Powell I'm starting. I bought some new 6" generals for my bro's Gilson the other day from ebay. Now I'm hunting for some 8". Are Generals still available? Yes, I saw the tires on OldMiniBikes, so please...I don't need the link. I just want to see what...

I’m currently working on an exhaust header idea for my son’s new DB30 that has the 97cc motor and was wondering if anyone has pulled out the very long exhaust studs from the stock head. If so can you tell me if they are a press in stud or screw in? :shrug:Looking to remove them so that I can...

Stud For Bell Crank

VINTAGE MINI BIKE

I was wondering how you do this?..The dirtbug tires seem awfully thin so I am not sure what all would be involved in putting screws in them and still holding air?

thanks Tomsprops for locating my dream ride shipping is going to be high but ill just have to mow a few more lawns this month:confused:cursing::cursing: motor bike, Nacho Libre type