Wanted a Tecumseh HS40 or HS50 steal flywheel needed, must be off a generated motor & have full magnets, points style, with good fan blades, look at picture to see what i am looking for.. please IM me with price & we will go from there.. thanks
Somehow I managed to lose the clamps off my Anderson Pegs....I have the pegs I just need the clamp and bevel washers as circled. There are a lot of knock-off brands that use the same clamps....just looking to buy some used ones. Needs to be for 7/8" tubing.
PM if you've got some kicking...
Tecumseh HS40 or HS50 steal flywheel needed, must be off a generated motor & have full magnets, points style, with good fan blades, look at picture to see what i am looking for.. please IM me with price & we will go from there.. thanks
Time to start shining! Feel free to share your tips on cleaning/shining up the paint. I know the coke and aluminum foil trick for chrome. Any other suggestions??
Anybody have a new style 3hp recoil shroud they are willing to part with? Have an engine with a vertical shaft shroud. Engine uses a cup for the recoil and NOT the clutch style. Thanks in advance!
I had so much fun on the old style DB30 build I am starting a new style build
This one will be a lot more time consuming if I can have it done by spring that would be great.
the Yellow Dirt Bug only took two months.
Like the title says, wanting to get either a jackshaft or TAV for my stepsons stock 97cc new style doodle. Does anyone make either for this bike? We ride our minis at camp that have a few pretty decent hills, and needless to say, he's practically pushing his bike towards the top. I know these...
Brand New Old Stock! No more messing around with scratched, chipped, stripped, painted over caps.
$10 bucks for two, plus $3 bucks to ship. Paypal only please.
I have a "few" of these...
Ran my mbx10 at the 1/8 mile track and only ran a 12.4 @55.xx. I know I'm heavy (250+lbs) but my bike doesn't launch real hard with my mongrel clutch, it really feels like it needs to engage at a higher rpm. I was wanting to know if it would probably knock some time off if I switched to a disk...
4" Straight Air Filter Cleaner, K&N Style with Tecumseh adaptor but you can adapt it to other engines.
Hole in adaptor is 1 1/2" center, mounting holes 1 7/8" on center.
I adapted one of these to my 79cc engine making a plate to go behind the Tecumseh adapter. $25.00 free shipping to any 48...
I bought out the assets of an old cycle dealer and got a coupla unsold Chinese bikes, including this factory stock doodlebug. I'm trying to think about what I might do with it. It runs fine but is gutless with a full size adult or large kid. I know I can (1) go with an 80 tooth sprocket, cost in...
Decent set of tote gote style shocks.
One shock has a dent in the side casing.
11 3/4" eye to eye.
Asking $35 plus shipping.
PayPal preferred, include the fees or send as a friend.
Does the predator hemi fit the new frame without any mods to the frame? obviously i know the plate has to be drilled. the valve cover is hitting the bar that holds the rear fender
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.