throttle

So this has more than likely been asked, but a search wasn't producing results. I'm using a different fuel tank for my 212, as well as an angled air filter. With that being said, it leaves two useless hoses... One that ran from the top of the fuel tank and the hose that goes from the old air...

I know ive seen this in one of my books' trouble shooting sections but cant seem to find it. What does it mean when the throttle plate opens on its own when running? I think a worn out throttle shaft? Engine just slowly flooring itself I suppose i could stop it from doing this by putting a...

I have a used Tecumseh HS-40 HS-50 vintage throttle control as pictured. BTW Torsion Spring number is 32923, you can still find it. 50 USD.

Bought a 79cc predator engine to go on one of my mbx12's and need a throttle kit for that engine so i can use my twist throttle. Anybody know where or got any ideas what will work with original setup . Want to keep the governor on it because of small children but need a setup that works with the...

OK. The Super Bronc is finished for now. All engine work and wiring is done. EXCEPT.....I can't get this throttle cable to stay put. I have done all kind of things I can think of but it slips down after about a half hour and the throttle positioning changes. Anyway, here is a picture of it where...

I installed a header, dyno cam, and 18lbs springs. It idles perfect but one you give it throttle it hesitates and backfires. And if you give it throttle and hold it, it has uneven rpm and like its restricted. I DONT HAVE INTAKE OR BIGGER JET. AND STOCK FLYWHEEL. .....HELP

Does anyone know how to reattach the butterfly to the throttle linkage? As you can see, I can pull the throttle linkage out because the screw came loose inside. Ive take the carb all the way down and apart but there doesn't seem to be any access to get a screw driver inside to screw the little...

Selling one more Vintage Lil Indian NOS Throttle,I can't locate the dummy side,if I can find it,I will include it,even if it's at a future date.Fits 7/8 bars,missing the cable adjuster $35.00 AND $5.00 Shipping ,paypal gift option only P.M for info,thanks :thumbsup:

Can someone direct me to where I might find the throttle parts to the Bing carb for a Sachs 50? See attached diagram. Parts 30, 31, 14, 13, 12, 11, 10, 9, and 8. Thanks for any help.

I am going to use this old Tecumseh on this bike (dubbed the Flying Grapefruit by my daughter)but its got the other kind of gov linkage in place for when it had the updraft Tillotson carb. Just wondering if anyone has converted this set up to the regular one. Can I just take it all out and put...

I remember reading something about them having lines so I think this is the real deal but I wanna make sure..

I purchased a throttle linkage kit from OldMiniBikes and am curious if anyone has pictures or instructions how to install it, I can't find much of anything on the subject

ok so I have a 212cc predator with a jet kit from OldMiniBikes warehouse and an air filter from studz.... and it is running terrible for some reason! the only thing I did was change those 2 things. When I go full throttle it feels like something is holding it back... like not enough air or something. Can...

What's the best throttle assembly you guys and gals have bought from OldMiniBikes? I just finished a bike and I bought the cheap throttle assembly, I think the $23 set that OldMiniBikes offers, and it just doesn't work well. I had the same set on another bike and never cared for it either, I guess I'm just cheap...

I'm finishing up my mini bike project, and I have the throttle not retracting smoothly. As in after twisting the throttle open, it doesn't want go back closed on it's own. Any suggestions?

All, I know this is a minibike forum, but you all know the Honda GX200 clone engines quite well so I thought I would ask for some help. I have a Harbor Freight Greyhound/Lifan engine (The older one) that is currently mounted on my rototiller. I have logged about 100 hours on the engine and...

Hello, I am pretty new to small engines and carburetors in general, so I need a little bit of help. I have a 212cc engine I got used. It was fully stock when I got it, and it's still stock with the exception of a free flowing exhaust. The problem with it is, it keeps fouling plugs. I...

hey guys new here im wondering if you all have any pictures of throttle set up on a 6.ohp Tecumseh powersport on a mini bike and what length cable do you all use. getting ready to place order with OldMiniBikes warehouse and I think 54 inches is to long thinking of going with the 48... any help is much...

What do some of you use to make throttle linkages? I saw a while back someone mention coat hangers but I really don't get how you put a coat hanger through a hole in a carb throttle plate. Being a guitar player I have a lot of old guitar strings around and I'm thinking of using those. At...

I recently traded a riding mower for two Baja Heats with 196cc clones on them. I'm entirely new to minibikes, but both bikes have issues running. So here are my questions. 1. Bike A only runs and starts with throttle, but accelerates and maintains top speed fine until I let off, it's missing...